gas and temp guage stays on

[Paul and Sue]

I just got my ACTIA cluster replaced on the recall. When I parked my rig and turn the key off, the gas and temp guage stayed on. I played with the key but they stayed on. This did not happen before I had the cluster replaced, is this right?

[Paul and Sue]

I just got my ACTIA cluster replaced on the recall. When I parked my rig and turn the key off, the gas and temp guage stayed on. I played with the key but they stayed on. This did not happen before I had the cluster replaced, is this right?

[M&EM]

What do you mean by staying on? If you mean the fuel gage does not go to E when the key is off, Neither does mine nor did it ever. When I turn the key back on, The fuel gage goes thru a calibration cycle to E then back to normal level. Always worked this way on mine even for each of 2 actia panels replaced last year. Just
checked mine to see if Temp gage does the same but couldn't tell without warming up the engine. That will have to wait for this week end.

Hope this helps.

Marty

[Paul and Sue]

Marty

That is what my gas and temp guage are doing including the calibration cycle and back to normal level when the key is turned on. It didn't do it before I had the ACTIA replaced. I was just wondering it I had a New problem?