Go Back   iRV2 Forums > THE CHASSIS CLUB FORUMS > Workhorse and Chevrolet Chassis Motorhome Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 01-06-2011, 03:37 PM   #1
Senior Member
 
Workhorse Chassis Owner
Join Date: Dec 2006
Location: Arizona
Posts: 103
Grease Fittings On Leving System

I have a 2006 Traillite 34 foot class A with Power Gear Leveling System. I was under the motor home and saw 1 grease fitting on each leveler. Nowear have I seen any info on grease fittings on the levelers. Does anyone else grease these fittings and if so how often are you supposed to grease them. I greased mine for the first time today.
__________________

__________________
Cacti is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-06-2011, 04:14 PM   #2
iRV2 Marketing
 
DriVer's Avatar
 
Winnebago Owners Club
Workhorse Chassis Owner
Coastal Campers
Carolina Campers
Join Date: Jan 2000
Location: Conway, SC
Posts: 23,304
Blog Entries: 70
Quote:
Originally Posted by Cacti View Post
I have a 2006 Traillite 34 foot class A with Power Gear Leveling System. I was under the motor home and saw 1 grease fitting on each leveler. no where have I seen any info on grease fittings on the levelers. Does anyone else grease these fittings and if so how often are you supposed to grease them. I greased mine for the first time today.
Cacti, Not exactly a Workhorse topic. I bet you could get a lot more answers in the Class A Forum about your jacks.
__________________

__________________
03 Adventurer 38G, Workhorse W22
F&R Track Bars, Safety+ , Ultrapower, Taylor Extremes, SGII
TST 507, Blue Ox, SMI, Koni FSD, CrossFire
RV/MH Hall of Fame - Lifetime Member
DriVer is offline   Reply With Quote
Old 01-06-2011, 04:34 PM   #3
Senior Member
 
Workhorse Chassis Owner
Join Date: Dec 2006
Location: Arizona
Posts: 103
Grease Fittings on Leveling System

I thought that being my Motor Home is on a work horse chassis a question about grease fittings on a leveling system was in the ball park. There have been discussions on how many grease fittings a W/H chassis has and where the brake bell crank was and how to grease it. Also many questions about mufflers, wipers, tires, and even lugnuts. But grease fittings on a leveling system don't apply.
__________________
Cacti is offline   Reply With Quote
Old 01-06-2011, 04:49 PM   #4
Senior Member
 
National RV Owners Club
Workhorse Chassis Owner
Join Date: Oct 2004
Location: Scottsdale, AZ
Posts: 1,427
Cacti,
I would guess Power Gear would have that info.Been 7 years since I contacted them about it. I lube those fittings about twice a year. Just one squirt. Wipe off excess and clean extended shaft with a silicone spray. Jacks always retracted better after that treatment.
Marty
__________________
2003 34' Dolphin 5342, W22, UP, UPGBrake, F and R Track Bars, Rear IPD sway bar, Koni FSDs, Safe-T-Plus, Scan Gauge II.. 2004 Jeep Liberty, Blue-Ox Adventa..
M&EM is offline   Reply With Quote
Old 01-06-2011, 05:00 PM   #5
iRV2 Marketing
 
DriVer's Avatar
 
Winnebago Owners Club
Workhorse Chassis Owner
Coastal Campers
Carolina Campers
Join Date: Jan 2000
Location: Conway, SC
Posts: 23,304
Blog Entries: 70
Quote:
Originally Posted by Cacti View Post
Also many questions about mufflers, wipers, tires, and even lugnuts. But grease fittings on a leveling system don't apply.
Cacti, "mufflers, wipers, tires, and even lugnuts" are all installed in Union City, IN.

I was just suggesting an alternate resource where you could get better exposure regarding your jacks.
__________________
03 Adventurer 38G, Workhorse W22
F&R Track Bars, Safety+ , Ultrapower, Taylor Extremes, SGII
TST 507, Blue Ox, SMI, Koni FSD, CrossFire
RV/MH Hall of Fame - Lifetime Member
DriVer is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with KVH R5SL Satellite System vito.a Technology: Internet, TV, Satellite, Cell Phones, etc. 9 04-06-2010 12:40 PM
W8003032 Tie Rod End Grease Boots- Don't make the $120 mistake fayrankin Workhorse and Chevrolet Chassis Motorhome Forum 4 11-01-2008 08:21 PM
2004 w-22 driveshaft grease fittings??? joelyn Workhorse and Chevrolet Chassis Motorhome Forum 7 10-14-2008 04:55 PM
Grease fittings on jacks NavlAv8r Fleetwood Products Owner's Forum 16 02-14-2008 02:07 PM
Voyager color backup camera system installed!! SargeW Winnebago Industries Owner's Forum 3 08-01-2006 08:41 AM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:39 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.