How do you clear an Actia Dash Notice

[Dunnpe]

I have the manual for this Actia dash, but none of the instructions show how to clear a "Change Engine Oil" notice. The oil is not an issue as I change it every 3,000 miles as a scheduled maintenance. Any suggestions or instructions will be appreciated

[DriVer]

Originally Posted by Dunnpe

I have the manual for this Actia dash, but none of the instructions show how to clear a "Change Engine Oil" notice. The oil is not an issue as I change it every 3,000 miles as a scheduled maintenance. Any suggestions or instructions will be appreciated

Dunnpe, I am pleased to help you with this. Turn the key to the "ON" position - do not start the motorhome.

Press the accelerator pedal rapidly all the way to the floor, 3 times within 5 seconds to clear the notice in your instrument panel.

Completed the process, turn the key off and wait for 10 seconds. Turn the key on and check. If the DTC has not cleared repeat the process. 3 times within 5 seconds. You will need to do this every time you change your oil and filter.

There you go!

[Dunnpe]

DriVer, Thanks so much for the remedy. I went directly out to the Motor Home and followed your instructions and the notice was gone. I will add this to the list of many other helps I have in a 3 ring binder for future references.

As always this forum is a superb reference to all who need help and to those that want to help others.
Thanks again

[wa8yxm]

If the chassis is a Worse. or the dash is the same as the one that Workhorse uses.. Tapping the "TRIP" button will clear the dash warning

I found that out by accident

And I think.. that is what you have.