Community Forums

Gregg · 07-13-2005, 01:54 AM

Hey guys,
Last night I retracted the slides and drove away, no problems.
At our destination I discovered no power to the slides or jacks.
Any ideas ??

Gregg

Gregg · 07-13-2005, 01:54 AM

Hey guys,
Last night I retracted the slides and drove away, no problems.
At our destination I discovered no power to the slides or jacks.
Any ideas ??

Gregg

Bob (WA0MQE) · 07-13-2005, 03:07 AM

I assume you've checked the fuses in the Battery Control Center (BCC) under the hood. Don't forget they require the ignition switch to be on, I forgot this once myself. The ignition switch has to close a relay, probably in the BCC in order for these two circuits to function.

Bob Bowers
2004 Pace Arrow 36B
Workhorse W22

Gregg · 07-13-2005, 03:27 AM

I discovered the problem late last night, now that the sun is up I will check that BCC.
Yes I did have the ignition on.
I wonder what is common to both systems,
All I can think of is the E-brake switch.

Gregg

Gregg · 07-13-2005, 05:13 AM

Fixed !!
It was the E-brake switch, it was stuck !!
I should have figured it out last night, However it was late and I was tired.
We are on our way !!
Thanks to all who ofered help !!
Gregg

Char N4FAP · 07-13-2005, 04:22 PM

Just had the same problem, but I had power to the solnoid on the hyd. pump motor and it turned out to be the solnoid. Used a test light to find problem.

CharWan