Scan Guage II & Allison 2350 Temp/reading

[Edouard]

Hi, all other readings I had on my Ford F-53 chassis came up when I plugged the Guage into the WH plug, left of the steering.
The Tranny temp did not, so went on the Logistic site and entered first one and then the second choices they offer for the Allison tranny, still nothing, any idea's.
Or is the Scan Guage II not able to retrieve the Allision 2350 temp.
I have an e-mail off to Logistic service already, but throught experience here may have the answer.
Edouard.

[DriVer]

Quote:

Originally Posted by Edouard Or is the Scan Guage II not able to retrieve the Allision 2350 temp..

Edouard, The code has not ben broken yet to read a 6 speed automatic transmission. It works fine on the 5 speed.

[Edouard]

Hi DriVer,

Thanks for the quick comeback, your right the 2350 is a 6 speed, guess we'll just have to wait, it's just nice to keep an eye on the Tranny temps, got used to it on Guage with my F-53.
Today now working on my Power Gear Auto leveling system, works fine, but Light for Jacks Down won't go out, have to pull control plug to stop annoying alarm and flashing lights when I put tranny in Drive.
Found out on Forums that it could be low fluid, well, I put in 2/3rds quart of suggested fluid, before it began a drip as suggested. We'll see if that fix's it.
Forums are a great learning tool, especially when getting into a new rig with new/different systems.
Thanks again.Edouard.