 |
08-06-2008, 11:12 AM
|
#1
|
|
Junior Member
Join Date: Nov 2004
Posts: 15
|
I am getting ready to input tran temp for allison tran. on my 08 souuthwind. however the list from scangage provides two codes? one is for gm vpm @ gm cansf, any suggestion as to which code would be proper..
thx
__________________
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
08-06-2008, 11:12 AM
|
#2
|
|
Junior Member
Join Date: Nov 2004
Posts: 15
|
I am getting ready to input tran temp for allison tran. on my 08 souuthwind. however the list from scangage provides two codes? one is for gm vpm @ gm cansf, any suggestion as to which code would be proper..
thx
__________________
|
|
|
|
| |
|
|
08-06-2008, 11:58 AM
|
#3
|
|
Senior Member
Official iRV2 Sponsor
Join Date: Jun 2008
Location: Centralia, WA
Posts: 603
|
You'll want to use the VPM.
__________________
Jon Brazel - Engine Performance Technician
Brazel's RV Performance Center & RV Park
|
|
|
|
| |
|
|
08-06-2008, 12:54 PM
|
#4
|
|
Junior Member
Join Date: Nov 2004
Posts: 15
|
thx
__________________
|
|
|
|
| |
|
|
08-06-2008, 03:31 PM
|
#5
|
|
Senior Member
Workhorse Chassis Owner
Join Date: Jan 2002
Location: Pacific Northwest or SoCal
Posts: 1,292
|
I believe you should use the additional digits listed "optional.
Fred
__________________
Fred and Bonnie
2005 Dolphin LX 6375
Abby, Ruffles & Scarlett, "The Cats" 
|
|
|
|
| |
|
|
08-14-2008, 02:56 PM
|
#6
|
|
Junior Member
Join Date: Nov 2004
Posts: 15
|
Well I have just had a chance to use the scangage II and I'm confused. TFT is not showing a constant tempt. It goes all the way to 600 and as low as 50 in sec. Water temp was at 200 and steady, TFT was like watching a tach up down up down????
__________________
|
|
|
|
| |
|
|
08-14-2008, 03:05 PM
|
#7
|
|
Senior Member
Official iRV2 Sponsor
Join Date: Jun 2008
Location: Centralia, WA
Posts: 603
|
Wooffeer,
As I am not familiar myself with new options that scangauge introduced to monitor transmission temps, I cannot give you a solution to the problem. However, have you tried contacting a technical adviser with scangauge to help you get it set up right? If you cannot get them to help you, let me know and I will try to get you some more information.
__________________
Jon Brazel - Engine Performance Technician
Brazel's RV Performance Center & RV Park
|
|
|
|
| |
|
|
08-14-2008, 03:42 PM
|
#8
|
|
Senior Member
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Dec 2004
Location: Mtn. Green UT/Salome AZ
Posts: 380
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by wooffeer:
I am getting ready to input tran temp for allison tran. on my 08 souuthwind. however the list from scangage provides two codes? one is for gm vpm @ gm cansf, any suggestion as to which code would be proper..
thx </div></BLOCKQUOTE>
wooffer, these are the code inputs I used. I assume you have the upgraded Scan Gauge.
New code :TXD: 6c18f1221940{01) May or may not need the 01. I included the {01}. Mine works
Old code :TDX: 6c10f1221940
I have the 05 Allison 5 speed on the W24
RFX: 046205190640
RXD: 3008
MTH: 00090005ffd8
NAM: TFT
__________________
2005 Pace Arrow
36B W24
Toad 2011 Silverado
|
|
|
|
| |
|
|
08-14-2008, 06:12 PM
|
#9
|
|
Junior Member
Join Date: Nov 2004
Posts: 15
|
Thx for the fast responce, I'll try to twick these codes and see what happens.. To darned hot out there right now.. 
__________________
|
|
|
|
| |
|
|
08-14-2008, 07:11 PM
|
#10
|
|
Junior Member
Join Date: Sep 2006
Posts: 24
|
I've got an 06 Southwind 32v with the 6 speed allison and I couldn't get any of the codes to work. My dad put it on his 04 5 speed and it worked fine.
I didn't really try to troubleshoot it too long since I was trying to get ready for a trip and as usual put everything off until the day before I was leaving!!!
__________________
|
|
|
|
| |
|
|
08-14-2008, 07:26 PM
|
#11
|
|
Junior Member
Join Date: Nov 2004
Posts: 15
|
That is not good! 
__________________
|
|
|
|
| |
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
»
Recent Discussions
»
Upcoming Rallies
No events scheduled in
the next 365 days.
|
»
iRV2 on facebook
|
Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 01:40 PM.
Chevy Camaro Forum
Ford Mustang Forum
Jeep Wrangler Forum
Volkswagen Touareg Forum
Land Rover Defender Forum
