Join CruisersForum Today
Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
Old 01-21-2008, 05:08 AM   #1
WALLY NJ is offline
Member
WALLY NJ's Avatar
Join Date: Jan 2003
Location: NEW MONMOUTH , NJ
Posts: 81
The ongoing to much heat + destroy a manifold saga contnues
I need to replace the Plug wires ..8.1 V 8
they are brittle and the engine is running rough
I read in some other posts about Taylors Extreme but cannot locate them anywhere here in Cen NJ
in the interim. does NAPA have a part # or another manufacturer ?
Of course we are headed to Springfield Mass for a show this weekend at the " BiG E"
as always the help from these boards is terrific
Thanks

__________________
Laura & Walt Maraldo

New Monmouth, NJ
  Reply With Quote
   
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-21-2008, 05:08 AM   #2
WALLY NJ is offline
Member
WALLY NJ's Avatar
Join Date: Jan 2003
Location: NEW MONMOUTH , NJ
Posts: 81
The ongoing to much heat + destroy a manifold saga contnues
I need to replace the Plug wires ..8.1 V 8
they are brittle and the engine is running rough
I read in some other posts about Taylors Extreme but cannot locate them anywhere here in Cen NJ
in the interim. does NAPA have a part # or another manufacturer ?
Of course we are headed to Springfield Mass for a show this weekend at the " BiG E"
as always the help from these boards is terrific
Thanks

__________________
Laura & Walt Maraldo

New Monmouth, NJ
  Reply With Quote
   
Old 01-21-2008, 05:31 AM   #3
Steady Eddie is offline
Senior Member
Steady Eddie's Avatar
Join Date: Apr 2006
Location: The Great Pacific Northwet
Posts: 382

NAPA: Part # BEL700269
Price: $47.99..fully warrantied 100%
save your sales slip--never buy another set.
__________________
Steady Eddie/1999 KSCA 3357/P12 Chassis/454 Vortec L-21

Allison transmisson
  Reply With Quote
   
Old 01-21-2008, 07:02 AM   #4
FrontRangeRVer is offline
Registered User
Join Date: Jun 2005
Posts: 1,567
Here you go!

Taylor Extreme Wire Set
__________________
  Reply With Quote
   
Old 01-21-2008, 03:35 PM   #5
Tenn.Vol. is offline
Senior Member
Workhorse Chassis Owner
Join Date: Nov 2004
Posts: 423
I was thinking that Blazers or oemtech had
the best TAYLOR wires for $70. or so.

But like Eddie said, (My Master tech too)
NAPA,{Belden wires} are life time warrant.
Tenn.
__________________
2002 WGO Adventurer 32' P32
  Reply With Quote
   
Old 01-21-2008, 04:49 PM   #6
Full-Timers is offline
Senior Member
Full-Timers's Avatar


Workhorse Chassis Owner
Join Date: Feb 2003
Location: Everywhere,USA
Posts: 1,037
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Steady Eddie:

NAPA: Part # BEL700264
Price: $47.99..fully warrantied 100%
save your sales slip--never buy another set. </div></BLOCKQUOTE>I am looking for more information on the NAPA: Part # BEL700264 but Napa screwed up their website and you can't do a search by part number anymore. Even goggle comes up blank. Any help?
__________________
Full-Timers
in a
2003 Rexhall Aerbus 3550BSL
  Reply With Quote
   
Old 01-22-2008, 06:31 AM   #7
Steady Eddie is offline
Senior Member
Steady Eddie's Avatar
Join Date: Apr 2006
Location: The Great Pacific Northwet
Posts: 382
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Full-Timers:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Steady Eddie:

NAPA: Part # BEL700269
Price: $47.99..fully warrantied 100%
save your sales slip--never buy another set. </div></BLOCKQUOTE>I am looking for more information on the NAPA: Part # BEL700269 but Napa screwed up their website and you can't do a search by part number anymore. Even goggle comes up blank. Any help? </div></BLOCKQUOTE>
==============================
Full-timers---
Go to the NAPAonline Web-site. Fill in the blanks
for Part Search. Type in your year Model and
Chevrolet as the brand name. Where it gets to
specifc model, type in any Chevrolet Model with
an 8.1L engine in it, like a 3500 Series Truck,
Select 8.1L engine from the drop-down Menu.
Select Spark Plugs and Ignition Parts. Wade thru
the spark plugs until you get to the last page.
BINGO! There it is...
__________________
Steady Eddie/1999 KSCA 3357/P12 Chassis/454 Vortec L-21

Allison transmisson
  Reply With Quote
   
Old 01-22-2008, 06:38 AM   #8
depchief is offline
Senior Member
depchief's Avatar


Appalachian Campers
Coastal Campers
Join Date: Jul 2006
Location: Conway, SC
Posts: 528
Blog Entries: 2
NAPA web site is a joke, you cannot find anything without a vehicle model, year and engine size.

About the same as their NASCAR offering in the Toyota
__________________
2004 Winnebago Brave, 32V, P32, Ultra-Trac, Rear Trac-Bar, Steer-Safe, Blue Ox Apollo
2004 S-10 Blazer
  Reply With Quote
   
Old 01-22-2008, 05:13 PM   #9
Full-Timers is offline
Senior Member
Full-Timers's Avatar


Workhorse Chassis Owner
Join Date: Feb 2003
Location: Everywhere,USA
Posts: 1,037
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Steady Eddie:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Full-Timers:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Steady Eddie:

NAPA: Part # BEL700264
Price: $47.99..fully warrantied 100%
save your sales slip--never buy another set. </div></BLOCKQUOTE>I am looking for more information on the NAPA: Part # BEL700264 but Napa screwed up their website and you can't do a search by part number anymore. Even goggle comes up blank. Any help? </div></BLOCKQUOTE>
==============================
Full-timers---
Go to the NAPAonline Web-site. Fill in the blanks
for Part Search. Type in your year Model and
Chevrolet as the brand name. Where it gets to
specifc model, type in any Chevrolet Model with
an 8.1L engine in it, like a 3500 Series Truck,
Select 8.1L engine from the drop-down Menu.
Select Spark Plugs and Ignition Parts. Wade thru
the spark plugs until you get to the last page.
BINGO! There it is... </div></BLOCKQUOTE>Did that. No trucks under the drop down menu for Chevrolet. I selected Chevrolet Truck instead. No selection for Spark Plugs and Ignition Parts, I selected Ignition Parts & Filters then Spark Plugs, Glow Plugs & Iginition Wires (yes it does say Iginition instead of Ignition). Selected 8.1L engine and I don't know for VIN. Scrolled to the 3rd page and BEL 700216 was all I found.
__________________
Full-Timers
in a
2003 Rexhall Aerbus 3550BSL
  Reply With Quote
   
Old 01-23-2008, 11:42 AM   #10
Scooter is offline
Senior Member
Workhorse Chassis Owner
Join Date: Jan 2002
Posts: 426
I contacted Belden and they told me they no longer mfr or sell these wires but try Federal Mogul.

I went to their website and found reference to PowerMAX HD spark plug wires.

Try www.federal-mogul.com or 800-325-8886 or 248-354-7700.

Let us know what you find and if they are equal to the NAPA HD wires.
__________________
2003 Dolphin LX 6355 w/ W22 chassis
  Reply With Quote
   
Old 01-23-2008, 12:54 PM   #11
JWatkins is offline
Senior Member
Workhorse Chassis Owner
Join Date: Aug 2007
Posts: 480
Try this link:
http://www.napaonline.com/MasterPages/NOLMaster.aspx?Pa...g+Wire+Set+-+Premium
Joe
__________________
Joe & Sherri
2004 Winnebago Adventurer 37B
UltraPower
  Reply With Quote
   
Old 01-23-2008, 12:58 PM   #12
Steady Eddie is offline
Senior Member
Steady Eddie's Avatar
Join Date: Apr 2006
Location: The Great Pacific Northwet
Posts: 382
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Let us know what you find and if they are equal to the NAPA HD wires. </div></BLOCKQUOTE>
====================
Scooter--
You done good. Fed/Mogul is the Parent Company that bought the Belden outfit. The NAPA wires
are F/M wires in a NAPA box..just bought and installed a set at the end of Oct. and put 3000
miles on them with no issues.
__________________
Steady Eddie/1999 KSCA 3357/P12 Chassis/454 Vortec L-21

Allison transmisson
  Reply With Quote
   
Old 01-23-2008, 04:19 PM   #13
Full-Timers is offline
Senior Member
Full-Timers's Avatar


Workhorse Chassis Owner
Join Date: Feb 2003
Location: Everywhere,USA
Posts: 1,037
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by JWatkins:
Try this link:
http://www.napaonline.com/MasterPages/NOLMaster.aspx?Pa...g+Wire+Set+-+Premium
Joe </div></BLOCKQUOTE>Thoes are BEL700269. Still can't find the BEL700264 that Steady Eddie is talking about.
__________________
Full-Timers
in a
2003 Rexhall Aerbus 3550BSL
  Reply With Quote
   
Old 01-23-2008, 04:46 PM   #14
Steady Eddie is offline
Senior Member
Steady Eddie's Avatar
Join Date: Apr 2006
Location: The Great Pacific Northwet
Posts: 382
Aha!!
Now we find where the big hairy animal went
in the woods!! My penmanship is not good.
"handwritten notes"...



I wrote a *9* that looked like a *4*


__________________
Steady Eddie/1999 KSCA 3357/P12 Chassis/454 Vortec L-21

Allison transmisson
  Reply With Quote
   
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Workhorse Spark Plug Wire Problem RVnUSA Workhorse Custom Chassis Motorhome Forum 119 07-25-2008 06:01 PM
Vortec Spark Plug Wire Update RVsteve MH-General Discussions & Problems 9 04-17-2008 08:24 AM
spark plug wire on Onan generator PaulC Winnebago Industries Owner's Forum 5 03-22-2008 03:26 AM
Spark Plug Wire Symptons max49 Workhorse Custom Chassis Motorhome Forum 44 03-26-2007 03:20 PM
Spark Plug Wire Problem - WH says they have a fix. JohnG Winnebago Industries Owner's Forum 3 10-28-2005 07:17 PM

Download our Mobile App






1% for the Planet
» Upcoming Rallies
No events scheduled in
the next 365 days.
» iRV2 on facebook

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 01:45 PM.