trouble codes

[jobrien]

A previous discussion mentioned about resetting the check engine light and trouble codes stored in memory.

On my Jeep, if the check engine light comes on, I can turn the ignition key on and off 3 times and the code will display. One of the jeep forums has a listing of all the codes, causes and resolutions. Just last week I had a bad gas cap that generated a P0456 code. I replaced the cap (one of the suggested problems)and after 2 days of normal driving the check engine light went out and the code is gone.

Is something similiar available with Workhorse to help determine a problem?

Thanks

John

[jobrien]

A previous discussion mentioned about resetting the check engine light and trouble codes stored in memory.

On my Jeep, if the check engine light comes on, I can turn the ignition key on and off 3 times and the code will display. One of the jeep forums has a listing of all the codes, causes and resolutions. Just last week I had a bad gas cap that generated a P0456 code. I replaced the cap (one of the suggested problems)and after 2 days of normal driving the check engine light went out and the code is gone.

Is something similiar available with Workhorse to help determine a problem?

Thanks

John

[DonavonP]

Hi John, I know what you're referring to but I don't know the answer specifically. However, there was an interesting thread on the OBD & Tech II.