Yes, Phone number is (913) 371-5373. My drier was a part number 4103063 18mm x 12mm with bracket.
Yes, Chevy/Workhorse supplies the Compressor, Drier, and Condensor and Acme Air used to supply everything else. I had no luck anywhere so I called Tiffin and they told me to call Acme. No problems. I think I bought mine online on their website.
They used both types, some had expansion valves which were mounted under the hood on the outside of the Evaporator box, then the orifice tubes were normally mounted in the lower line going to the evaporator. I surely haven't seen all the different configurations but those I mentioned where most common.
If you need an expansion valve, get it from Acme as well or you may never have any luck matching it up.
|