Windshield Washer Inop

[ROMAD]

The windshield washer on my W24 quit working on our last trip. The wipers work when you turn on the washer switch but the pump does not come on. I checked the washer pump and it is working. Is there a fuse that I am missing? I looked at the Chassis Guide but I can not find a fuse for the washer. Looked at the two fuse panels but no luck there either. Any suggestions?

[DriVer]

Quote:

Originally Posted by ROMAD The windshield washer on my W24 quit working on our last trip. The wipers work when you turn on the washer switch but the pump does not come on. I checked the washer pump and it is working. Is there a fuse that I am missing? I looked at the Chassis Guide but I can not find a fuse for the washer. Looked at the two fuse panels but no luck there either. Any suggestions?

Gene, All I see is a 25A fuse located inside on the panel for "WIPER". I expect that if you pull it, the pump will stop working.

Just a suggestion, see if you can introduce a secondary ground on the pump motor and try the control on the stalk again. Most problems on 12 volt systems are resolved by assuring a good ground.

[ROMAD]

Took the tank out today, found corroded contacts on the inside of the connector. Took the connectors out of the plastic holder and gave them a good cleaning and now it works. Should have seen the corrosion yesterday when I had the connector off. Thanks DriVer for putting me back on track.