Community Forums

Lakeman1 · 01-29-2013, 06:43 PM

Changing oil and lubing chassis on W-22 WorkHorse. I got 13 zerks, is that the total? Specs say 6.5 quarts with filter, I'm using the 2 quart filter, what is my capacity? I can't figure it as I don't know what the OME filter capacity is.
Thanks

edgray · 01-29-2013, 07:49 PM

Quote:

Originally Posted by Pete & Linda

Changing oil and lubing chassis on W-22 WorkHorse. I got 13 zerks, is that the total? Specs say 6.5 quarts with filter, I'm using the 2 quart filter, what is my capacity? I can't figure it as I don't know what the OME filter capacity is.
Thanks

The OEM recommended filter, AC/Delco PF454, is approximately 1/2 quart. I'll let you do the math.

Ed

Lakeman1 · 01-29-2013, 08:12 PM

KO so I go with 8 QTs, Thanks.

donhoward49 · 01-29-2013, 08:55 PM

Do a search on this forum for grease zerks, & for U joint grease,, Lots of good reading. Do you have a zerk on the brake bell crank? do you have zerks on the jacks? Their is a long but good post on u joints and flushing out the old grease and making sure all points get greased.