RV Trip Planning Discussions

Go Back   iRV2 Forums > THE CHASSIS CLUB FORUMS > Ford Motorhome Chassis Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 09-06-2019, 04:13 AM   #1
Junior Member
Join Date: Sep 2019
Posts: 1
1991 Ford 460 no start

I have a 1991 Fleetwood bounder 33 ft with a Ford tbi 460 it used to run perfect untill I parked it I started it or it won't start die to no spark in line spark test nothing so we replaced distributor, coil,IGN, control mod , regulator, IGN wires spark plugs absolutely everything except the computer one thing that was noticed was the online spark check was intermittent some times it would spark other times it wouldn't it won't start when we shut key off I had just drove it from California to Denver ran perfect it sat for a year went to start it and no spark should I just buy new ecm ?

Scott44 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-06-2019, 04:59 AM   #2
Senior Member
Join Date: Mar 2019
Posts: 414
I would not buy a new ECM yet. If it was sitting for a while my first check would be for bad grounds. The second would be for wires that mice have chewed on. . ECMs rarely go bad, it's much more likely something simple that has been overlooked. A circuit tester (ice pick with a light in the handle) or multimeter is your best friend. Harbor Freight has them for less than $10. Happy hunting.

arcaguy is offline   Reply With Quote
Old 09-06-2019, 09:24 PM   #3
Senior Member
Join Date: Mar 2019
Posts: 161
While your're trouble shooting, Ford never made a 460 TBI. Your system is port injected. One injector per manifold runner.
House Husband is offline   Reply With Quote

ford, no start

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I jump start my 1991 Mallard Sprinter with Ford 460 automatic? Takawira iRV2.com General Discussion 7 01-25-2017 12:35 PM
1991 Tioga 27' ford 460 JayP5405 Ford Motorhome Chassis Forum 4 10-07-2015 05:23 AM
1991 Fleetwood 460 Ford fuel pump/starting problems Dick & Kathy Ford Motorhome Chassis Forum 7 10-05-2014 12:45 PM
1991 Ford 460 hemidart Fleetwood Owner's Forum 3 10-15-2013 06:47 PM
1991 ford 460 cmpman Ford Motorhome Chassis Forum 7 04-16-2012 07:24 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 01:04 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.