 |
|
11-10-2019, 05:06 PM
|
#1
|
|
Senior Member
Join Date: Jul 2013
Posts: 339
|
1999 F53 cruise control question
Somebody know what cruise control buttons are used in 99 F53 Bounder ?
I'm having problems on setting the CC , I have to play on /set , on/ set many time until the CC engages . maybe no good contact on the buttons...thanks
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
11-10-2019, 05:12 PM
|
#2
|
|
Registered User
Ford Super Duty Owner
Join Date: Nov 2014
Location: NW Ohio
Posts: 7,114
|
Before you do that, take your VIN # to any Ford Dealer and ask them if the CC recall applies to you, and has it been done.
|
|
|
|
|
11-10-2019, 05:42 PM
|
#3
|
|
Senior Member
Join Date: Jul 2013
Posts: 339
|
Quote:
Originally Posted by Waiter21
Before you do that, take your VIN # to any Ford Dealer and ask them if the CC recall applies to you, and has it been done.
|
The recall is done .... I will try cleaning the contacts ....
|
|
|
|
|
11-10-2019, 06:35 PM
|
#4
|
|
Senior Member
Join Date: Jul 2014
Posts: 35,446
|
Try changing the CCS1 ( cruise control cancel ) switch, out on or near the master cylinder.
Over 5 years, I had 2 fail. The first symptom was it not engaging when I hit the set button. After a minute or so of pushing the button, it would set.
I narrowed it down to only acting up after I hit the brakes.
Once it started working, It would work fine until the next time I used the brakes. Sometimes I would tap the brakes and it would work again.
The switch is $25 at most auto parts stores. Its part # is CCS1.l 
|
|
|
|
|
11-10-2019, 07:25 PM
|
#5
|
|
Senior Member
Join Date: Jul 2013
Posts: 339
|
Quote:
Originally Posted by twinboat
Try changing the CCS1 ( cruise control cancel ) switch, out on or near the master cylinder.
Over 5 years, I had 2 fail. The first symptom was it not engaging when I hit the set button. After a minute or so of pushing the button, it would set.
I narrowed it down to only acting up after I hit the brakes.
Once it started working, It would work fine until the next time I used the brakes. Sometimes I would tap the brakes and it would work again.
The switch is $25 at most auto parts stores. Its part # is CCS1.l Attachment 266472 |
Ok I will check tomorrow ,thanks
|
|
|
|
|
11-11-2019, 02:51 AM
|
#6
|
|
Senior Member
Join Date: Jul 2014
Posts: 35,446
|
You can unplug the switch and test it with a multi meter.
I think the switch is closed with brake off. Set the meter in diode testing and listen to it beep, and then apply the brake. If it has a delay when you let off the pedal, its bad.
|
|
|
|
|
11-11-2019, 08:08 AM
|
#7
|
|
Senior Member
Join Date: Jul 2013
Posts: 339
|
Quote:
Originally Posted by twinboat
You can unplug the switch and test it with a multi meter.
I think the switch is closed with brake off. Set the meter in diode testing and listen to it beep, and then apply the brake. If it has a delay when you let off the pedal, its bad.
|
great thanks so much..
|
|
|
|
|
11-11-2019, 09:40 AM
|
#8
|
|
Senior Member
Fleetwood Owners Club Ford Super Duty Owner
Join Date: Dec 2014
Location: Northeast Ohio
Posts: 481
|
I took my 2000 F53 switches apart and cleaned them, probably the same as yours.
http://www.irv2.com/forums/f258/crui...ml#post4783250
__________________
2000 Fleetwood Southwind 32V - Ford F53 V10 6.8L 208"WB 20,500 GVWR
2022 Palomino Puma Destination 39FKL
Of all the things I have lost, I miss my mind the most.
|
|
|
|
|
11-19-2019, 05:28 PM
|
#9
|
|
Senior Member
Join Date: Jul 2013
Posts: 339
|
Quote:
Originally Posted by Randalpho
|
the 1995 model has different steering wheel ... mine has superduty steering wheel .. no brushed ...
|
|
|
|
|
11-19-2019, 06:40 PM
|
#10
|
|
Senior Member
Join Date: Dec 2003
Location: Motor City, Mich
Posts: 3,369
|
Randolpho's is a 2000. Should look just like yours, he was just posting in a thread about a 1995.
__________________
Tim.
|
|
|
|
|
12-01-2019, 07:04 PM
|
#11
|
|
Member
Ford Super Duty Owner
Join Date: Nov 2016
Location: St. Catharines, Ontario
Posts: 70
|
I had no CC when I bought my 99 F53, and after lengthy troubleshooting following Ford's manual procedure, it came down to the steering wheel buttons. Easy to replace, nothing obviously wrong with them, and although they are $300 at Ford dealership, I found them on eBay for just over $30.
|
|
|
|
|
12-02-2019, 10:57 AM
|
#12
|
|
Senior Member
Join Date: Jul 2013
Posts: 339
|
Quote:
Originally Posted by Dank1945
I had no CC when I bought my 99 F53, and after lengthy troubleshooting following Ford's manual procedure, it came down to the steering wheel buttons. Easy to replace, nothing obviously wrong with them, and although they are $300 at Ford dealership, I found them on eBay for just over $30.
|
do u have the part number of the switch?
thanks
|
|
|
|
|
12-03-2019, 07:55 AM
|
#13
|
|
Member
Ford Super Duty Owner
Join Date: Nov 2016
Location: St. Catharines, Ontario
Posts: 70
|
Hi
My invoice says: SW5926 Cruise Control Switch. I have checked their website and they don't show any, and eBay doesn't find any either.
VERY IMPORTANT: does your horn work? If it doesn't work, that's the first thing you have to fix. That's what the Ford manual says as the first step in troubleshooting the cruise control problem, and now I know that is true. Don't ask how I know. After fixing the horn, I found the problem was indeed the switches on the steering wheel. It would be worth for you to search with wrecking yards first.
If you need the troubleshooting procedure I can send it to you.
Dan
|
|
|
|
|
06-11-2020, 08:16 AM
|
#14
|
|
Senior Member
Join Date: Jul 2013
Posts: 339
|
I open the ON / OFF switch , cleaned with electronics spray and now it works great!!
|
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
