Installing RVI 3 Breaking System in 2011 Honda CRV

[gaffanning]

Question? Has anyone installed phanton bracket for honda CRV to support the RVi 3 break system. If so, could you provide a picture of the braket location on the floor? Did you have to drill 4 holes into the floor board for the bracket? Any help would be greatly appreciated.

gefann

[vettenuts]

Did you buy this system new? RVI provides a bracket free of charge if one is required for a particular application.

[Reacher]

If your referring to the stop plate used on a flat floor installation you can get instructions here:


https://rvibrake.com/

[Dov327]

Mine is secured to the front of the seat onto the veritable brackets down low close to the floor. Two screws on each side.

[gaffanning]

Originally Posted by Reacher

If your referring to the stop plate used on a flat floor installation you can get instructions here:


https://rvibrake.com/

Thanks, Reacher. Found the video.