Need Nut & Cap For Simulated Wheel Cover

[KJB]

I lost one of the caps that covers the nut that holds the simulated wheel cover on the front of my 2011 F-53. I picked up a nut with cap at an RV dealer that looked the same but it was too small. I think it was a 14mm. Does anybody know the correct size for my F-53 and where I can get one? I know Dicor has a listing but they list several and I'm not sure which one I need.

[KC1BUD]

Quote:

Originally Posted by KJB I lost one of the caps that covers the nut that holds the simulated wheel cover on the front of my 2011 F-53. I picked up a nut with cap at an RV dealer that looked the same but it was too small. I think it was a 14mm. Does anybody know the correct size for my F-53 and where I can get one? I know Dicor has a listing but they list several and I'm not sure which one I need.

I too knocked off a simulated nut but I picked mine up and managed to get it re-attached. Dicor also sent me replacement thread on nuts that turned out to be too small.

[KJB]

I lost mine going down the road so it is gone. Oddly enough the one I picked up that was the wrong size thread did have the correct size cap but I was afraid the cap would be loose if I pried it off and put it on my nut. I’m going to call Dicor today to see if they can come up with the correct size for me.

[John Mo]

Please post what you find out. I'm missing a simulated lug nut too.

[Camping4fun]

It's a 14mm X 2.0

[KJB]

The one I bought from the dealer was a 14mm and it was too small. I called Dicor and they said they have a couple different sizes and need to know which I have. I haven’t done it yet but I’m going to take the nut to a hardware store and find a bolt that it screws on so I know the size to tell Dicor.