Where to buy the EGR tubes on a 1996 460

[mrhockey]

I just replaced a cylinder head with a busted exhaust port....shocking I know. I reluctantly put the factory manifolds back on because of funds right now but plan on putting headers on over the winter. My question is where can I get the 2 tubes on the drivers side manifold and the single tube in the passengers side? I think I have seen the one offered from Dorman but not all of them. I know they won't come out in tact, maybe the passengers side since all I have to do is snap the bolts off in the manifold but the drivers side we couldn't get out with heat or penetrating oil.

[chboone]

I purchased the EGR A.I.R tube for a 84 460 from this company. If you don't see what you want on the web site, give them a call, I did.
PCI Inc. - Aftermarket exhaust and emission control parts

[RLS7201]

Those two tubes on the left side will come off clean with a little thought. Get 2 small ball peen hammers and start tapping on the fittings. Use one hammer for a backer and the other to hit on the opposite side. This will shake the rust loose. When you get the fitting to move a little, work it back and forth. Don't force it in one direction. Take you time. It may help to loosen the tube at the EGR valve first. Those two small bolts on the right side will probable come out clean too, if you tap on them for awhile. Been there done that 3 times on Banks installs.

Richard