Bypass the Danfoss fan control
Is there any reason I couldn't put a bypass wire to get my fan to turn off?
I only have a 3 wire Connector
I believe it's a positive wire a negative wire and the temp sensor wire.
I ran a jumper from the temp sensor wire to the positive of the solenoid
Now the fan comes on when the engine gets to 220 and turns off at 180
I am bypassing the danfoss electronic control box on top of the solenoid valve
__________________
2020 Cyclone 4005 Toyhauler 5th wheel 2005 HR Navigator 45 PBQ - SOLD
2005 HR Imperial 42 PBQ - SOLD
|