Go Back   iRV2 Forums > THE CHASSIS CLUB FORUMS > Spartan Motorhome Chassis Forum
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-02-2012, 10:25 AM   #1
Senior Member
 
Robert-W's Avatar
 
Join Date: May 2000
Location: Indianapolis,IN USA
Posts: 114
Turning Radius

I have a 2004 Dutch Star on the Spartan chassis. the model number is 3807. I would like to know if anyone would happen to know what degree of wheel cut or crimp angle I have. Thank You
__________________

__________________
2004 Dutch Star 3807 2000 Saturn
Robert-W is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-02-2012, 04:32 PM   #2
Senior Member
 
Cat320's Avatar
 
Fleetwood Owners Club
Join Date: Mar 2011
Posts: 2,643
All I can offer is my turning angle on our 41' mh on a Spartan...55 degrees.
__________________

__________________
2009 Amer Coach Allegiance 40X Riding On A Spartan Chassis
400 HP Cummins ISL
Pulling a Honda CRV
Cat320 is offline   Reply With Quote
Old 05-02-2012, 09:03 PM   #3
Senior Member
 
Join Date: Dec 2009
Posts: 214
My 2003 Spartan MM chassis has the IFS 1200 front end, has a max cut angle of 45 degrees. The manual is to large to post here (over 5 meg). PM me if you think the manual may be helpful.
__________________
PandK is offline   Reply With Quote
Old 05-02-2012, 09:27 PM   #4
Registered User
 
Mr_D's Avatar
 
iRV2 No Limits Club
Join Date: May 2011
Location: Vancouver, WA
Posts: 11,276
Quote:
Originally Posted by PandK View Post
My 2003 Spartan MM chassis has the IFS 1200 front end, has a max cut angle of 45 degrees. The manual is to large to post here (over 5 meg). PM me if you think the manual may be helpful.
We got the last 2002 Dutch Star with the Spartan MM chassis 12,000# axle and it had a 50 wheel cut. With the 14,600# axle we got in 2004 we have a 55 wheel cut. Newmar wanted to put a 13,200# axle under our rig but it only had a 45 wheel cut and I needed at least a 50 cut to get into our parking spot at the house.
__________________
Mr_D is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2014, vBulletin Solutions, Inc.