I cannot speak for how exactly that radio antenna is, but typically its a straight run to the radio. You may have to disconnect the antenna at the radio and tie a string on the end, and once you remove the antenna from the roof, carefully pull it out. (then use the string to pull back the new antenna. If not, there will be a male/female connection in the roof that you will find once you remove the old one. Its important to remove ALL of the old sealant from the old antenna, then apply new self leveling lap sealer (typically a bead under screw holes) and then covering all of the tops of the screws/seams, like the antenna is now. Any RV store should have the lap sealer.
__________________
-------------------------
Jeff & Jenn Breault
2012 Entegra Anthem 44SL, 2020 Jeep Gladiator Rubicon Launch Edition
|