Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 04-15-2015, 10:25 AM   #1
Junior Member
Hurley's Avatar
Join Date: Apr 2015
Location: Folsom, CA
Posts: 7
2003 Winnebago - Help finding fuse or identifying bad breaker/relay

I have a 2003 Winnebago Adventurer on Workhorse Chassis. Just lost power to the backup camera and switch that retracts step when ignition turns on. Wiring diagram indicates they are both on the same circuit. I looked at the breaker under the step and it's not tripped. Should I try to replace the breaker or is there possibly a relay somewhere that's bad? I tested every fuse in my box and all are good. There is also an inline fuse for the monitor but that's good too.
First time on this forum, I always see good answers to difficult questions...anxious to see what you guys come up with! Thanks!!

Hurley is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-15-2015, 04:52 PM   #2
Senior Member
Join Date: Jul 2013
Posts: 171
I don't own a Winnie but on my Damon there is a fuse located in the Battery Control Center for my back-up camera. My BCC is located under the hood on the drivers side. If I didn't have solenoid issues I wouldn't have known it was there. Odd place if you ask me, I thought all the coach fuses were in the fuse box inside the MH.

Don and Barb is offline   Reply With Quote
Old 04-15-2015, 05:47 PM   #3
Junior Member
Hurley's Avatar
Join Date: Apr 2015
Location: Folsom, CA
Posts: 7
I fixed it! Turns out it was a bad fuse under the dash. The first place I looked and the last place I looked. Looks like my fuse reader was malfunctioning for some reason and I did it the old fashion way by pulling out the fuse, Tada!
Hurley is offline   Reply With Quote

fuse, winnebago

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Winnebago Launches Their In-It-To-WINNit Contest DriVer RV Industry Press 2 03-17-2015 08:59 AM
Finding a fuse jeepsrule Monaco Owner's Forum 18 10-12-2014 05:16 AM
Winnebago Journey 2003 MHUNT Class A Motorhome Discussions 4 08-26-2014 12:51 PM
Winnebago Industries Announces "Partners In Excellence" Awards DriVer RV Industry Press 0 04-17-2014 08:50 PM
2003 Winnebago 35U WH Electrical Problems Pie Crust Class A Motorhome Discussions 3 03-06-2014 05:34 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 11:33 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.