Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 10-20-2011, 01:17 PM   #1
Junior Member
bobdotdan59's Avatar
Join Date: Sep 2011
Location: Waldorf, MD
Posts: 4
2004 Southwind Fascia Cover Install

I have a 2004 Southwind 37C on a Workhorse chassis. The adhesive on the Velcro holding the fascia cover to the dash has dried out. The cover is completely off at the top. The backup monitor is jammed in the fascia and held down by velcro also. Am replacing the velcro but want to add two screws (one to either side) with nylon inserts in dash to help retain the cover. No brackets are on the monitor. Anyone have any ideas on velcro that can take the heat and not break loose? Does anyone with a Southwind have the two screws mounted in the top of the dash? Any ideas would be appreciated.

bobdotdan59 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-21-2011, 11:40 AM   #2
Community Moderator
"007"'s Avatar

Nor'easters Club
Workhorse Chassis Owner
iRV2 No Limits Club
Join Date: Oct 2004
Posts: 24,411
Welcome Bob to irv2.
When you change out the Velcro use the industrial strength type also adding the screws will help.
98KSCA, 99MACA, 03 KSCA-3740- 8.1 Chev-- ALLISON Trans, now in good hands
"007" is online now   Reply With Quote

install, southwind

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cover or Not to Cover? Rocket728 Class A Motorhome Discussions 37 01-08-2011 02:54 PM
This Weeks RV Product Review - To Cover your RV or Not & Winterizing Warpath Vendor Spotlight (Deals, Announcements & More) 1 10-16-2010 05:03 PM
Cover protection bounder-andy MH-General Discussions & Problems 1 10-14-2010 09:13 PM
Trik-L-Start Charger/maintainer install in 2004 Winnebago Journey. mycoolbeans Winnebago Industries Owner's Forum 11 07-29-2009 03:31 PM
Engine Cover Removal Geechee Winnebago Industries Owner's Forum 20 12-10-2007 08:13 AM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 06:14 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.