2004 Southwind Fascia Cover Install
I have a 2004 Southwind 37C on a Workhorse chassis. The adhesive on the Velcro holding the fascia cover to the dash has dried out. The cover is completely off at the top. The backup monitor is jammed in the fascia and held down by velcro also. Am replacing the velcro but want to add two screws (one to either side) with nylon inserts in dash to help retain the cover. No brackets are on the monitor. Anyone have any ideas on velcro that can take the heat and not break loose? Does anyone with a Southwind have the two screws mounted in the top of the dash? Any ideas would be appreciated.
|