Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 06-19-2015, 07:13 AM   #1
Junior Member
Join Date: Jun 2015
Location: Wisconsin
Posts: 21
2015 Itasca Sunstar kitchen vent and slide noise

Just picked up this new RV 2 weeks ago and am trying to minimize road noise. The outside flapper from the kitchen vent flaps like crazy, does anyone have any suggestions, keep in mind the outside is about 8 foot to the vent.
The 2 front slides make a loud squeak/crack noise by the top slide track. I sprayed slide lube on the area and will see if that works this weekend. Any ideas on this.

RVHERE is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-19-2015, 07:32 AM   #2
Senior Member
Kpjp's Avatar
Join Date: Feb 2012
Posts: 200

I used the awning pull rod to rotate the two locking tabs on the vent. Typically, I would only use the one locking tab which was towards the front of the motorhome. I do not have an outside vent on my current motorhome. As for the slideout, I had a locking bar similar to the photo on my hydraulic slide out. It held the slide in tightly, but make sure to remove it before operating the slide.

Happy Camping,
JimClick image for larger version

Name:	ImageUploadedByiRV2 - RV Forum1434720726.740719.jpg
Views:	37
Size:	118.4 KB
ID:	97717

Sent from my iPad using iRV2 - RV Forum
Jim & Karin
2014 Fleetwood Bounder 35K
2007 Volkswagen EOS
Kpjp is offline   Reply With Quote

itasca, noise, slide, vent

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2015 Tioga Ranger 31D Problem - Leans swonuke MH-General Discussions & Problems 3 07-08-2015 06:31 PM
2015 Itasca Sunstar kitchen vent and slide noise RVHERE iRV2.com General Discussion 2 06-20-2015 03:22 AM
Help with kitchen/microwave vent andrei Entegra Owner's Forum 5 02-02-2015 05:21 AM
Kitchen slide - sink drain slow '11 Phaeton 36QSH jr1 Tiffin Motorhomes Owners Forum 2 01-21-2015 12:36 PM
awling on slide 2005VECTRA Winnebago Industries Owner's Forum 3 10-08-2013 10:49 PM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 11:45 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.