Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 08-16-2012, 07:05 PM   #1
Senior Member
 
buck454's Avatar
 
Join Date: Jul 2011
Location: NorthEast Texas
Posts: 671
aligning and balancing

Do you have trouble finding shopss that can handle your motorhome for aligning and/or balancing? I suspect the small shops near me could not begin to handle a 30K lb MH, but I might be surprised. How about trucking centers, would that be a possiblility?
__________________
competitive shooter RVer
2006 Gulfstream Friendship G7 8411 400HP Cum.
RM Sterling/'07 Chevy Colorado CrewCab 4x4
buck454 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-16-2012, 07:17 PM   #2
Senior Member
 
broadrun's Avatar
 
Monaco Owners Club
Join Date: Jul 2012
Posts: 715
Quote:
Originally Posted by buck454
Do you have trouble finding shopss that can handle your motorhome for aligning and/or balancing? I suspect the small shops near me could not begin to handle a 30K lb MH, but I might be surprised. How about trucking centers, would that be a possiblility?
Funny, was just thinking about that tonight. I am going to take it to a fleet shop near by. RV dealerships could probably do it also but might cost a ton.
broadrun is offline   Reply With Quote
Old 08-16-2012, 08:19 PM   #3
Senior Member
 
buck454's Avatar
 
Join Date: Jul 2011
Location: NorthEast Texas
Posts: 671
Quote:
Originally Posted by broadrun View Post
Funny, was just thinking about that tonight. I am going to take it to a fleet shop near by. RV dealerships could probably do it also but might cost a ton.
Please let us know how that works out. I do not know of immediate need but could have need in future. Looked at 2009 MH today that had some wear on outter rib and dealer committed that it was not unusual in that particular brand and said often customers never had this checked once the loaded their new MH down. Continuing to say that they come new just fine, but once loaded with all a owners goods, it could change. Makes sense.
__________________
competitive shooter RVer
2006 Gulfstream Friendship G7 8411 400HP Cum.
RM Sterling/'07 Chevy Colorado CrewCab 4x4
buck454 is offline   Reply With Quote
Old 08-17-2012, 03:46 AM   #4
Registered User
 
dukenrock's Avatar
 
Join Date: Jan 2010
Posts: 431
I just had new steer tires installed this week and a 4 wheel alignment done at a reputable heavy truck service shop. Ran the tires through FMCA (Michelin).
__________________
2017 RAM DRW
2018 DRV Full House JX450
dukenrock is offline   Reply With Quote
Old 08-17-2012, 05:24 AM   #5
Senior Member
 
Join Date: Sep 2007
Location: texas
Posts: 2,422
buck454 how far from ft worth are you i have mine done there 4 wheel lazar $140
whem2fish is offline   Reply With Quote
Old 08-17-2012, 03:47 PM   #6
Senior Member
 
buck454's Avatar
 
Join Date: Jul 2011
Location: NorthEast Texas
Posts: 671
Quote:
Originally Posted by whem2fish View Post
buck454 how far from ft worth are you i have mine done there 4 wheel lazar $140
Thanks W2F, Was there just yesterday...looked at motorhomes at mhsrv and ancira (we like to look), had some sushi and headed home. About 3 1/2 hours one way, but might be worth it to get proper tire/alignment treatment. Our MH purchase last year was at ProSales in Colleyville.

I am planning on some service at Freightliner/Cummins in Tyler in the
future, they might be able to help also. I would like brakes checked for safety sake and piece of mind.

Bill
__________________
competitive shooter RVer
2006 Gulfstream Friendship G7 8411 400HP Cum.
RM Sterling/'07 Chevy Colorado CrewCab 4x4
buck454 is offline   Reply With Quote
Old 08-17-2012, 05:04 PM   #7
Senior Member
 
vsheetz's Avatar


 
Fleetwood Owners Club
Ford Super Duty Owner
Join Date: Jun 2012
Location: SoCal
Posts: 15,749
Check Michelin website for authorize dealers. Many/most are MH / truck experienced and capable.
__________________
Vince and Susan
2011 Tiffin Phaeton 40QTH (Cummins ISC/Freightliner)
Flat towing a modified 2005 Jeep (Rubicon Wrangler)
Previously a 2002 Fleetwood Pace Arrow 37A and a 1995 Safari Trek 2830.
vsheetz is offline   Reply With Quote
Old 08-17-2012, 05:26 PM   #8
Senior Member
 
buck454's Avatar
 
Join Date: Jul 2011
Location: NorthEast Texas
Posts: 671
Quote:
Originally Posted by vsheetz View Post
Check Michelin website for authorize dealers. Many/most are MH / truck experienced and capable.
Good advice. I do have Michelin tires.
__________________
competitive shooter RVer
2006 Gulfstream Friendship G7 8411 400HP Cum.
RM Sterling/'07 Chevy Colorado CrewCab 4x4
buck454 is offline   Reply With Quote
Old 08-17-2012, 07:41 PM   #9
Senior Member
 
broadrun's Avatar
 
Monaco Owners Club
Join Date: Jul 2012
Posts: 715
Quote:
Originally Posted by buck454

Please let us know how that works out. I do not know of immediate need but could have need in future. Looked at 2009 MH today that had some wear on outter rib and dealer committed that it was not unusual in that particular brand and said often customers never had this checked once the loaded their new MH down. Continuing to say that they come new just fine, but once loaded with all a owners goods, it could change. Makes sense.
Will do. My tires are 7 years old but have almost no tread wear. Hard to believe. Bought the coach used a month ago. They show no signs of dry rot / sun damage. Would like to get another year or so but also don't want to push it safety-wise.
broadrun is offline   Reply With Quote
Old 08-17-2012, 09:11 PM   #10
Member
 
Join Date: Oct 2002
Location: Titusville
Posts: 83
I would be very reluctant to allow a RV dealer to do any chassis work.
wd4kaq is offline   Reply With Quote
Old 08-18-2012, 03:56 AM   #11
Senior Member
 
Join Date: Sep 2007
Location: texas
Posts: 2,422
why i ask Ray's champion spring just south of down town is where i had mine done. that said you were 5 minutes from my house off 35W. im packing now off to cedar creek then through tyler to henderson
whem2fish is offline   Reply With Quote
Old 08-18-2012, 05:07 AM   #12
Senior Member
 
Elkhartjim's Avatar
 
Newmar Owners Club
Texas Boomers Club
Freightliner Owners Club
Join Date: Jul 2008
Location: Don't mess with Texas
Posts: 3,118
FYI...the ride height should be checked prior to alignment.

I recently asked the local Strouhal Tire Center alignment tech about ride height adjustment prior to checking a motorhome alignment and he had that deer in the headlights look. He had a Tiffin Alegro Bus on the machine at the time.

If the ride height is off, the motorhome wheels cannot be aligned correctly.
__________________
Jim with Judy
2017 Newmar Ventana 4369, 2005 Jeep Wrangler (Rock Crawler), 2016 Jeep Wrangler (Mall Crawler)
Elkhartjim is offline   Reply With Quote
Old 08-18-2012, 01:15 PM   #13
Moderator Emeritus
 
Gary RVRoamer's Avatar


 
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,671
Very few RV dealers even do chassis work - only the largest will have chassis techs and an alignment machine. They generally send the work out to be done. And charge extra for it.

Most any truck chassis shop can do a Class A motorhome.
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
Gary RVRoamer is offline   Reply With Quote
Old 08-19-2012, 07:52 AM   #14
Senior Member
 
broadrun's Avatar
 
Monaco Owners Club
Join Date: Jul 2012
Posts: 715
This may be a dumb question but how do you tell if your wheels are stud piloted or hub piloted? I understand the difference between the two but am new to RV'ing and have never changed a tire so am not sure if I have additional lug nuts inside the outer dually wheel. I have a 2001 HR Endeavor and assume they are Hub Piloted. They are 255 /70 R22.5. Thanks for any help. When I purchased the vehicle it didn't have a spare so I want to purchase online to save a few $$.
broadrun is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 07:48 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.