Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 04-01-2012, 12:02 PM   #1
Junior Member
yuma's Avatar
Join Date: Dec 2007
Posts: 23
bedroom slide inoperative

2000 allegro bay bedroom slide will not move.Can't find a fuse.There is NO movement either way.There is a on/off switch in the cupboard that I've moved from off to on ........nothing.I checked all the conections at the battaries.Any ideas b4 I go to a garage? I have manually put the slide in for now.By the way,the LR slide works.Thanks in advance for any ideas.

yuma is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-01-2012, 01:24 PM   #2
Senior Member
donhoward49's Avatar
National RV Owners Club
Workhorse Chassis Owner
Join Date: Aug 2010
Location: Portland, Oregon
Posts: 827
Fuze would be the first thing to find. Might be in a panel near the on/off switch. Could be an inline fuze near the slide motor, Can you get to the motor, Can you check to see any power to the motor? Hopefully some one with your brand will come to the rescue.

2004 National See Breeze LX8375, Towing a 2012 Liberty
retired. Now What?
donhoward49 is offline   Reply With Quote
Old 04-01-2012, 01:39 PM   #3
Senior Member
toneumanns's Avatar
Join Date: Jul 2011
Posts: 792
Parking brake set?
2011 Itasca Suncruiser, Jeep Grand Cherokee toad
MSgt retired USAF 1988, AA retired 2005
toneumanns is offline   Reply With Quote
Old 04-01-2012, 06:30 PM   #4
Senior Member
38 Special's Avatar
Monaco Owners Club
Join Date: Aug 2010
Location: Irondale, Alabama
Posts: 470
The best place to get your answer is TiffinRVNetwork.

I frequent their forum and attend their rallies, and I don't even own a Tiffin. Great group.
2008 Monaco Camelot 42 DSQ
Irondale, Alabama
38 Special is offline   Reply With Quote
Old 04-02-2012, 04:02 AM   #5
Community Moderator
RV Wizard's Avatar

Country Coach Owners Club
Appalachian Campers
Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 11,807
Did you turn the ignition key on?
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
RV Wizard is offline   Reply With Quote
Old 04-02-2012, 07:16 PM   #6
Senior Member
Chuck&Pam's Avatar
Holiday Rambler Owners Club
Join Date: Sep 2006
Location: Monroe, NC
Posts: 523
Is there a relay that could go bad?
Chuck & Pam (the people) - Bobbie & Nikki (the cats)
2008 Holiday Rambler Endeavor 40PDQ & Chevy Tracker ZR-2
NJ4B F261484 (ex: NCBounder)
Chuck&Pam is online now   Reply With Quote
Old 04-04-2012, 09:08 AM   #7
Junior Member
yuma's Avatar
Join Date: Dec 2007
Posts: 23
Just landed in Victoria,B.C. and will do some checking today re:fuses,relays ect.Will post result asap. Thanks to those who replied.
yuma is offline   Reply With Quote
Old 04-07-2012, 09:50 PM   #8
National RV Owners Club
Workhorse Chassis Owner
Join Date: Feb 2011
Posts: 98
Mine gave up on me too the other day...I went to my compartment with my inverter and power to the relays for the slides. There I just pulled out the connectors for the power coming to circuit board for slides, and the other connectors on that circuit board. I blew into them and put them back on and went and checked it, and the slide went to working. I'm just saying...but I was do a break. Good luck. My point: check the simple stuff first and completely.
lilgreek7 is offline   Reply With Quote
Old 04-08-2012, 05:49 AM   #9
Senior Member
RetiredBob's Avatar
Join Date: Apr 2010
Location: Portage, MI
Posts: 298
Same thing happened to me. I pulled the switch from the wall and had a loose connection there.
2011 Newmar Canyon Star 3411; Workhorse W22; 8.1L; Allison 6-speed
2013 Honda CRV
Portage, MI
RetiredBob is offline   Reply With Quote
Old 04-08-2012, 07:47 AM   #10
Monaco Owners Club
Join Date: Jun 2010
Location: Willard .Missouri
Posts: 70
my allegro bay 2003 36dm as reset fuses under the front hood on the fire wall? Hope it something simple.
oh no is offline   Reply With Quote
Old 04-09-2012, 09:21 AM   #11
Junior Member
yuma's Avatar
Join Date: Dec 2007
Posts: 23
Well,I guess you could say that it was a simple fix.After cutting a 3 by 5 inch hole into the storage cabinet wall to get at the back of the on/off switch and finding the control board,I used a test light and could'nt get a glimmer of light on the wires.Went back to the Batt. again and found the power supply wire (2 identical black, 1 for each slide) and cut off and replaced the connection even tho it did'nt "look" too bad,and everything works like new!!!PTL!!!
yuma is offline   Reply With Quote
Old 04-10-2012, 09:39 AM   #12
Senior Member
xctraveler's Avatar
Tiffin Owners Club
Freightliner Owners Club
Join Date: Jun 2004
Location: Rochester NY - off the road for a bit
Posts: 312
Lucky! On my Southwind I found power all the way back to the motor. New motor and gear box $$$.

Paul Rocking down the road in our '12 Phaeton 36QSH, (in service May 2012 ) We tow an '11 4 dr Jeep Wrangler Unlimited Rubicon - Read my blog at http://xctraveler.blogspot.com/ AKA RVM86
xctraveler is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing Bottom Slide Seal sgtjoe National RV Owner's Forum 16 09-25-2012 12:37 PM
Vesta slide inoperative rg neumann Monaco Owner's Forum 11 04-09-2012 09:21 PM
Loft Bedroom Height cheal Damon 11 04-05-2012 06:35 AM
slide to floor heigth adjustment vc390 National RV Owner's Forum 2 04-01-2012 02:35 PM
Slide seating tight against wall when extended zzjea National RV Owner's Forum 14 04-01-2012 07:14 AM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 01:48 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.