I have a 2000 Harney(SMC) Renegade with a CAT 300HP engine that wiped out the belt, caused by a frozen up A/C compressor. Does anyone know the number of the belt?? CAT can't help me because they said they do not install the original belt with whatever configuration. Anyone have an answer??
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
This one worked on my 330HP. I think you can cross reference to other belt manufacturers using the NAPA number. NAPA 25-080710
While working down there you might want to replace the H20 V belt NAPA 25-9341
IF all else fails you can count the ridges on the belt and get a estimate of the belt length by running a cord around the pulleys and go to a parts store and they should be able to get you a belt but it may take a couple of tries when estimating the belt length.
Safe Travels
Bob
__________________
Bob & Sandi, dogs Tasha a Frenchie and Tiki a Skipperkey
SW OREGON 2005 34 foot DolphinLX
If towing: a bright red 2016 Mini Cooper on a tow dolly.
Winnebago Owners Club Solo Rvers Club Freightliner Owners Club
Join Date: Jan 2007
Location: Pahrump, NV
Posts: 479
Quote:
Originally Posted by 1ciderdog
This one worked on my 330HP. I think you can cross reference to other belt manufacturers using the NAPA number. NAPA 25-080710
While working down there you might want to replace the H20 V belt NAPA 25-9341
IF all else fails you can count the ridges on the belt and get a estimate of the belt length by running a cord around the pulleys and go to a parts store and they should be able to get you a belt but it may take a couple of tries when estimating the belt length.
Safe Travels
Bob
Worked on mine too. Original # is 124730-004. NAPA 25-080710. I carry an extra just in case!! Good advice on the water pump belt. Replacement of that one cured my overheating problem.
Richard