|
04-24-2015, 10:34 AM
|
#1
|
Senior Member
Join Date: Nov 2012
Posts: 420
|
Changing the porch light
Hi all, we have a Itasca Meridian 36M (2013). One of the porch lights are out and am planning to change the light bulb.
There is no screw to take the cover out. I see couple of tiny slots which i am thinking is to insert screw driver in and pup it open. I tried this but it is tight and I am afraid to break the plastic/glass cover.
Please advise.
Itasca Meridian 36M, 2013. Jeep Wrangler X, 2009
Full Timer from Norfolk VA
__________________
Itsca Meridian 36M. 2012 mdel.
Jeep Wrangler 2009
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-24-2015, 11:05 AM
|
#2
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,451
|
I can't enlarge the picture of your coach enough to be sure but I think the lens is like mine. 2 1/2" X 5" rectangular. If so ; yes you have to pry the lens off at the area of the tabs and there is a possibility of breakage.
Depending on the age and sun ( or freezing temp ) exposure these lenses do get brittle, wait for temps in the 70 degree range if possible , to try removing, replacement lenses are available in clear and amber, at almost every RV parts store.
Good luck.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
04-24-2015, 11:26 AM
|
#3
|
Senior Member
Join Date: Feb 2010
Location: Judsonia, AR
Posts: 113
|
Mine is the same light and it did crack when I pried it off at the slots. It was really brittle so should have waited until the sun was on it to warm it up??
__________________
Roger & Karen Johnson
2015 Discovery 40E
2010 Jeep Wrangler Sahara
|
|
|
04-24-2015, 11:49 AM
|
#4
|
Senior Member
Fleetwood Owners Club American Coach Owners Club Spartan Chassis
Join Date: Oct 2009
Location: Fort Pierce, FL
Posts: 1,024
|
Should be able to squeeze it top and bottom with your hand and it should come off
__________________
Revolution LE 38X C9 Cat
2020 Jeep Gladiator Toad
|
|
|
04-24-2015, 12:22 PM
|
#5
|
Registered User
Damon Owners Club Workhorse Chassis Owner
Join Date: May 2008
Location: N. Palm Springs CA (in winter)
Posts: 2,420
|
If it breaks it breaks. Suggest you do the bulb exchange/maintenance after returning from a trip when time will allow you to get a new replacement porch lite if needed. Could upgrade to one with motion sensor and get LED bulbs so you don't have to do this again anytime soon.
Worked for me when I replaced all bulbs to LEDs.
|
|
|
04-24-2015, 01:05 PM
|
#6
|
Community Moderator
Join Date: Sep 2011
Location: Between the Oceans
Posts: 8,034
|
Quote:
Originally Posted by krivanj
Should be able to squeeze it top and bottom with your hand and it should come off
|
+ 1 squeeze. i replaced it with an led with yellow light for not attracting insects.
__________________
Steven & Polly
2000 Country Coach Intrigue 40' ISC 350
2018 Ford Explorer 4WD
|
|
|
04-24-2015, 05:38 PM
|
#7
|
Senior Member
Fleetwood Owners Club American Coach Owners Club
Join Date: Mar 2011
Posts: 6,768
|
Quote:
Originally Posted by krivanj
Should be able to squeeze it top and bottom with your hand and it should come off
|
That's how mine works.
__________________
2014 American Eagle 45T
DD 13, 500 HP
Pulling a Honda CRV
|
|
|
04-24-2015, 08:08 PM
|
#8
|
Senior Member
Winnebago Owners Club
Join Date: Sep 2013
Location: FTer Class of 2015 Origin: Evergreen, Colorado
Posts: 1,565
|
Quote:
Should be able to squeeze it top and bottom with your hand and it should come off...
|
X3.
\ken
__________________
Ken, Deb, & Gadget (WIT Club, FMCA, SKP, and grateful volunteers with Habitat for Humanity and SOWERs), traveling in a well-behaved 2005 Winnebago Vectra 40FD w/1100w solar, some gee-golly-whizbang, and a TRAILERED 2015 Cherokee TrailHawk toad.
|
|
|
04-24-2015, 08:26 PM
|
#9
|
Senior Member
Join Date: Nov 2012
Posts: 420
|
Itasca Meridian 36M, 2013. Jeep Wrangler X, 2009
Full Timer from Norfolk VA
__________________
Itsca Meridian 36M. 2012 mdel.
Jeep Wrangler 2009
|
|
|
04-24-2015, 08:26 PM
|
#10
|
Senior Member
Join Date: Nov 2012
Posts: 420
|
Thanks to all. Does these pics help to better diagnose?
Itasca Meridian 36M, 2013. Jeep Wrangler X, 2009
Full Timer from Norfolk VA
__________________
Itsca Meridian 36M. 2012 mdel.
Jeep Wrangler 2009
|
|
|
04-25-2015, 01:46 AM
|
#11
|
Senior Member
Winnebago Owners Club
Join Date: Sep 2013
Location: FTer Class of 2015 Origin: Evergreen, Colorado
Posts: 1,565
|
My apologies, Nxkharra ... that light fixture is quite different from what I thought you might have. I've never seen that kind of fixture before. Sorry for the bad info. /ken (good luck)
__________________
Ken, Deb, & Gadget (WIT Club, FMCA, SKP, and grateful volunteers with Habitat for Humanity and SOWERs), traveling in a well-behaved 2005 Winnebago Vectra 40FD w/1100w solar, some gee-golly-whizbang, and a TRAILERED 2015 Cherokee TrailHawk toad.
|
|
|
04-26-2015, 06:32 AM
|
#12
|
Senior Member
Fleetwood Owners Club American Coach Owners Club Spartan Chassis
Join Date: Oct 2009
Location: Fort Pierce, FL
Posts: 1,024
|
Yes, we were all incorrect. I still think if you press upward on the bottom near the tabs it will pop out moving towards the top.(But I am guessing).
__________________
Revolution LE 38X C9 Cat
2020 Jeep Gladiator Toad
|
|
|
04-26-2015, 07:50 AM
|
#13
|
Member
Join Date: Sep 2003
Location: Berwick, PA
Posts: 31
|
The chrome part of the light is separate from the lense. Pry out at the bottom corners and it will come off. Note it is also held in place by the caulking around the lense. The lense is held in place by screws found under the chrome piece. Before removing the cover rap it with a screw driver to see if the light comes on. the prongs on the bulb tend to corrode and keep the light from working.
__________________
Jim, Beryl, & BJ the Westie
2013 Journey 34B, Cummins 340, Allison 2500
2014 Jeep Cherokee
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|