I have a 2000 32' Adventurer and am having continual problems with the Coach entry door latch mechanism. It slowly gets out of adjustment too the point that my wife cannot open the door and even I have problems. I then loosen the three screws that hold the latch mechanism's together (outside and inside), adjust the assembly up and re-tighten the screws. This works for a while, then I have to redo it.
What can be done to correct this once and for all? Any help would be appreciated.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I would take it a part a clean/degrease all parts. Then put some silicon on the back side of the latch (to absorb vibrations), then use blue loctite on fasteners.
Might want to mark it's location after adjustment so you don't smear goo everywhere.
__________________
2011 MVP Tahoe 230 QB on Ford E350 Chassis
Linear Mode
