Cummins 8.9 ISL Belt Number

[Dutchstar08]

Does any have the number for the serpentine belt for a 2008 (2007 Chassis)
8.9 isl side radiator?
2008 Newmar dutch star Spartan chassis
I know I can call Monday and find out but just wondering if anyone had it handy?

Thanks.
Bill

[HicksRA]

GATES GREENSTRIPE MICRO-V SERPENTINE BELT K080702HD 8PK1784
This what I put on my 05 DS with 370 Cummins. Yours may or may not be the same.

[Fiesta48]

It's on the belt. Rotate the belt until you can see it.

[Dutchstar08]

Originally Posted by Fiesta48

It's on the belt. Rotate the belt until you can see it.

Been There Done That. NO

[Dutchstar08]

Thanks Hicks RA, that's the belt I'm looking for. Measured it this afternoon and that's the one. Now I can order one to keep as a spare JIC.

Just need the oil filter number now.

[R2Home]

The oil filter that I just got for our 2009 8.9 from Cummins is part number LF9009. Cost was $47.34. It should be the same for your engine.

[Dutchstar08]

Thank You R2Home
Now I have all the filter numbers,
I do all my own maintenance so this helps.
Only had the Newmar for a few months now.
Still learning quite a bit difference from the Freightliner chassis on the goof stream.
Now that I'm on the uphill from knee replacement ready to go.

[R2Home]

No problem with the numbers. Like a lot of others here I also do most of the maintenance on our MH, at least all that I can do.
How is the knee replacement going? Rumor has it that I may be in that boat before too much longer, but I am holding of as long as possible.

Originally Posted by Dutchstar08

Thank You R2Home
Now I have all the filter numbers,
I do all my own maintenance so this helps.
Only had the Newmar for a few months now.
Still learning quite a bit difference from the Freightliner chassis on the goof stream.
Now that I'm on the uphill from knee replacement ready to go.