RJOL
We converted ours from a King to Queen. We took 6" from each side of top board. The harder part was reducing the size of the base. We were only able to reduce by 3" on each side due to the floor access to engine. Pay particular attention to this or you may cover the access. Process is not difficult. Our King was only 80" long the same as the queen so we did not have to reduce length.
We are VERY happy with the resulting room to maneuver.
FWIW
__________________
2016 Thor Tuscany XTE 36MQ, 360HP Cummins ISB 2017 Jeep Wrangler Unlimited
|