Quote:
Originally Posted by Boberp
Hello,
The door on my Class A Winnie Adventurer's door is sticking making it difficult to close. Is there a general post on Irv2 that addresses this sort of issue. If not does anyone have a suggested method for correcting this issue?
Thanks!
|
I'm not sure if my experience will be helpful to a Winnie owner or not, but our rig had a door that had to be slammed pretty hard to latch. There's a round device on the door frame that the latch closes around. It can be loosened with a hex wrench and adjusted in or out to adjust it. Just mark where it is, loosen it, and retighten it a tiny bit further out. Try that and tinker with it until your happy.
We keep ours pretty loose so we can just ease the door shut and it'll latch without slammng it at all. Then when moving we set the deadbolt for a firmer fit.