Engine access from the top

[wingman139]

I have a 2006 Itasica Winneabago pusher. C7- 350 cat and I would like to get to the motor from the top. How does the floor come up. Can't seem to figure it out. It's a 40KD.

[scooterbob]

There should be access panels in the floor in the back of the MH

[wingman139]

Thanks for comeback.Yes I know the floor comes up but I can't figure out how it comes up. I can't see how it is held down.

[Cooperhawk]

Don't know about your floor plan but ours is under the bed and there is a large metal panel that has to be unbolted and lifted out.

[High Ball]

On mine I have 1 screw each corner. There are in-bedded in carpet. You really have to look and feel to find them. Hope this helps

[Cat320]

Originally Posted by wingman139

Thanks for comeback.Yes I know the floor comes up but I can't figure out how it comes up. I can't see how it is held down.

Our last coach had four bolts hidden in the carpet in the rear of the MH. They are there, but sometimes hard to find.

[jmcannonball]

Try dragging a small magnet slowly around the carpet edges and see if it snags on a screw head. On my coach, the screws were pretty well hidden in the pile of the carpet.