Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 06-22-2013, 04:42 PM   #1
Senior Member
Rusty years's Avatar
Join Date: Dec 2012
Posts: 528
flooring problem

Had new flooring put in, planked vinyl in our holiday rambler endeavor, in whole thing including bedroom. Had it done last September, 2012, we have 4 slides. Bedroom perfect, however in living area, on drivers side, where couch and dinette are, when slide comes in it is scratching floor. It never did it for at least 6 or more months and now we see it happening and it will ruin the floor. Alliance said we should never adjust the slide because it is working just fine. Our old floor was tile and it had a black mark where the slide came across. Because this flooring is much lower than the tile I figured there would not be a problem. Any ideas.

Rusty years is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-22-2013, 05:40 PM   #2
Senior Member
trackman's Avatar
Join Date: Oct 2011
Posts: 1,136
You can lift the front floor section of the slide enough to see what is hanging down. I use a piece of wood and a lever bar. If it is a screw or nail just take a cutoff saw or small rotary dremal and shave it down

trackman is offline   Reply With Quote
Old 06-22-2013, 05:54 PM   #3
Senior Member
camperkids's Avatar
Join Date: Aug 2011
Location: Bel Air, Maryland
Posts: 193
I understand that the rollers can go bad and might need replacing. Do as said lift it up and take a look, you should be able to see see and check the rollers. Jim
Jim/Lois 1999 Newmar Mountain Aire MACA3797 F53 - V10
Bel Air, Maryland 5 Star Tuning & Air Lift Bags
camperkids is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:52 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.