Originally Posted by tom n sue
My fresh water pump is not coming on. The red indicator light on the panel is on showing me its ready to operate. My first thought was to check the pressure switch but I don't know where it is. On the red and black wire coming in I have no power
. Any suggestions.
Thanks a lot
Hi Tom, First things first........Welcome here!
Based on your post, I would be looking for the 12VDC fuse location, Look around your water bay for the pump and the controller, maybe you will locate the power/fuse source. I am not sure if you have a controller in your system? See attached file. The other thing that might speed this up for you is, send a private message to one of the Moderator's and ask them to move your thread (question) to the "Entegra section" for better response's.
Here is the Moderator's list iRV2 Forums - Show Groups
, and you will see next to "contact" a "send PM " button.