Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 08-08-2015, 01:50 PM   #15
Junior Member
Join Date: Jun 2015
Posts: 10
Finally Got it installed

Thank you all for the information. In the end I needed to remove the bedroom window. The emergency escape window was just a bit too small. After getting the washer inside I realized it would not just slide in as I had hoped. Was about 1/4" shy so I needed to remove the dresser. It only took a couple of hours once I decided to get started and convinced a couple of neighbors to lend a hand getting it in. So the wife is happy and we'll be road testing it to Tennessee in a couple of weeks.
I hope I added the picture properly. If not I apologize.

Attached Thumbnails
Click image for larger version

Name:	RV Washer.jpeg.jpg
Views:	110
Size:	199.3 KB
ID:	102543  

agood01 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-08-2015, 02:08 PM   #16
Senior Member
cbeierl's Avatar
Winnebago Owners Club
Freightliner Owners Club
Join Date: Aug 2005
Location: Nashua, NH
Posts: 2,088
How well does it work lying on its side like that?

Chris Beierl

2005 Winnebago Vectra 36RD
cbeierl is offline   Reply With Quote
Old 08-08-2015, 07:46 PM   #17
Senior Member
mccrob's Avatar
Join Date: Feb 2012
Posts: 384
Looks like my coach FYI the factory slid it in by cutting a hole in the closet and then just a panel held by 4screws
Bob & Elaine McClelland and the spoiled pup Izzie
2008 Monaco Diplomat
Desert Hills & Parker Az
mccrob is offline   Reply With Quote
Old 08-08-2015, 08:07 PM   #18
cavalryman's Avatar

Join Date: Jun 2015
Posts: 74
I just pulled mine out last week. It was leaking water so I assumed it wasn't winterized properly.

MH has a rear bath with a 22 1/2" door. Washer was 23 1/3 when together. I had to remove the bathroom door and the top of the washing machine to get the necessary clearance. It was still very tight, especially with that hunk of concrete on the top of the drum.

I had to take the scissor mechanism off the front door to swing it open wide enough. My son and two friends were able to lift it up and over the passenger seat and out the door.

I discovered the water leak coming from the bottom of the drum where a black rubber drain tube connects to the drain valve. Upon taking the tube off I found hole. Looking inside the tube I found chew marks from a mouse. I also found a hole chewed through the vent hose. It appears a mouse chewed its way into the washing machine though the vent and then out the rubber tube. New part on its way from Splendide.

Hopefully not too much other damage from the mice.

Good tip for when I put it back in "temporarily remove the concrete".
Attached Thumbnails
Click image for larger version

Name:	IMG_20150804_114237162_HDR.jpg
Views:	90
Size:	219.8 KB
ID:	102579  
cavalryman is offline   Reply With Quote
Old 08-08-2015, 09:33 PM   #19
Senior Member
Join Date: Dec 2007
Posts: 982
Our whirlpool units fit thru the front door. All we needed to do was undo hook the scissors hinge on top the door so it opened all the way out, moved the passenger seat the whole way back and turned it so its back was against the wall. Then straight back the hall into its closet in the bathroom

Ron & Linda
2000 Dynasty 38PBS
Full time since 2007
Nana25K is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
WANTED: 1970-72 Chevy Grumman Motorhome heyitsmike Vintage RV's 5 11-21-2014 10:28 PM
Best way to wax motorhome smlranger Class A Motorhome Discussions 17 06-13-2014 11:21 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 11:06 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.