Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-27-2015, 10:26 PM   #1
Member
 
Winnebago Owners Club
Join Date: Sep 2012
Posts: 40
Smile How Do I Get Them Out?

I have two Duo Therm air conditioners on my roof (vintage 2005). I pulled the center grill out easily and the two screws in the front to remove the larger ceiling cover, but the two rear screws are covered with round plastic "plugs" that don't want to come out. I tried pushing and twisting - no luck. Any suggestions would be much appreciated. Thanks.

Denny
__________________

__________________
dmroaming is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-27-2015, 11:14 PM   #2
Senior Member
 
Join Date: Aug 2007
Location: Roaming Fulltimer
Posts: 405
They just snap in. I typically use a sharp knife to get under the edge and pop them off.
__________________

__________________
tkcas01 is offline   Reply With Quote
Old 04-28-2015, 11:09 PM   #3
Member
 
Winnebago Owners Club
Join Date: Sep 2012
Posts: 40
Smile

Quote:
Originally Posted by tkcas01 View Post
They just snap in. I typically use a sharp knife to get under the edge and pop them off.
That did it. They were so tight I thought I was going to break it. A small jewelers screwdriver did it.
Thanks
__________________
dmroaming is offline   Reply With Quote
Old 04-29-2015, 12:48 PM   #4
Senior Member
 
walt2137's Avatar
 
Monaco Owners Club
Join Date: Sep 2003
Location: Quitman MS
Posts: 2,657
While you have the cover off re torque the 4 hold bolts down to 40 to 45 INCH lb, I used blue loctight on my hold bolts because the viberation of traveling down the road does loosed the hold down bolts, or has on the coaches that we have owned.
__________________
Walt & Will
2000 Dynasty
2013 F150 XLT Crew C 4X4
2015 Kia Soul 6 speed manual
walt2137 is offline   Reply With Quote
Old 04-29-2015, 11:22 PM   #5
Member
 
Winnebago Owners Club
Join Date: Sep 2012
Posts: 40
Smile

Thanks, Walt. I removed the ceiling cover to check on the bolts (a friend told me they tend to loosen up over time and miles) - mine were all snug/tight, but I didn't do locktite. Next time.

Denny
__________________
dmroaming is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:32 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.