Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-27-2016, 04:17 PM   #1
Junior Member
 
Join Date: May 2016
Posts: 12
HWH jack part broken

I have a 2011 Tiffin 36QSH and after a recent trip I used jacks to set it up for unloading and cleaning. The right rear jack was set on some blocks one of which settled on the front side which caused an extreme angle on the foot of the jack. When I retracted the jacks to move I heard a loud pop and later discovered a spherical washer about 2 in in diameter and a bolt with self-lock nut and could see where the top of this bolt had broken off in the center of the foot. This was laying on the ground. The foot is still on the jack and held in place by the retraction springs. Has any one encountered this type of problem. I realize I may have to remove the jack to get is repaired. I imagine the jack will work without this but wish to repair it. Any suggestions?

Thank you
__________________

__________________
rfguy is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-27-2016, 04:33 PM   #2
Senior Member
 
greystroke's Avatar


 
Monaco Owners Club
Freightliner Owners Club
Holiday Rambler Owners Club
Join Date: Jul 2009
Location: Spring Hill, Florida
Posts: 1,150
Go to the HWH web site and you can probably find a manual on the jack along with Part Numbers. You should be able to get the model number of the jack on the jack itself.

Pix might help forum members help you.
__________________
98 Endeavor DP, ISB275
RX300, Falcon II hitch, BB Vantage Select
VMSpc, 2002 Grey Ford Powerstroke
TST 507 w/ 10 Sensors
greystroke is offline   Reply With Quote
Reply

Tags
hwh



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
HWH Drop Down Jack / Broken Actuator Cable tonyscarface RV Systems & Appliances 3 08-30-2014 08:45 AM
Broken Spring on HWH Rear Leveling Jack mr300ce RV Systems & Appliances 15 02-21-2014 09:32 AM
Broken 5th Wheel Window Broken=== the Good and Bad with Newmar jojolima Newmar Owner's Forum 2 06-16-2010 09:45 PM
Broken inside door lock knob broken supercub Fleetwood Products Owner's Forum 1 12-03-2009 01:40 PM
HWH jack broken retraction spring bowats Winnebago Industries Owner's Forum 8 02-13-2008 04:26 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 07:15 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.