Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 09-05-2012, 04:54 PM   #1
Junior Member
Join Date: Aug 2012
Posts: 3
monaco pac brake trouble

my pac brake on my 330 hp cummins, 2000 monaco windsor, is not working. it works when power is sent to the silonoid and the relays are working and the foot switch is working but stil no brake, anyone got any ideas as the local deisel mechanic in my area is at a loss to sort this out after 4 hours.

remi is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-05-2012, 05:31 PM   #2
jmarmor's Avatar
Join Date: Sep 2012
Posts: 80
possible solution

I'm not sure if this will help you but I had a situation where the same thing went on. My mechanic gave up. He changed the pac break, selenoid, put in a heat shield around the selenoid. He went through all the wiring but insisted the relays were working since we changed them. I changed the relays on my own and solved the problem for a short period of time. I later found a small water leak in the back of the cabinet that houses all the electronics which caused moisture to get into the relays each time it rained or ac run off down the back. Got rid of the leak with some silicone and changed the 3 X$1.79 relays again and never had the issue again. $5000 covered by xtra ride, and I found the problem 4 months later for a $8 fix

jmarmor is offline   Reply With Quote
Old 01-24-2013, 04:49 PM   #3
Junior Member
Join Date: Nov 2010
Location: Elk Grove, CA
Posts: 2
On my 1997 American Eagle when activating the pac brake it immediately shifts down to 4th gear. This over revs the engine for a moment. It does not permit me to use the pac brake in 5th gear. Can this be reprogrammed to permit me to make my own selection of gears when activating the Pac Brake?
schuh is offline   Reply With Quote

brake, monaco

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 01:39 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.