Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 02-22-2013, 01:02 PM   #1
Junior Member
Join Date: Jan 2010
Posts: 12
National RV fender cap problem

I have a 2001 National RV Marlin, Model 370. The right side fender and cap have seperated. There is about an 1/8 gap, probably due to vibration. It was glued not mechanically attached. I thought I would use screws and nuts to reattach it to the cap and use a good adhesvive inbetween the two pieces. The flange on the two pieces is wide enough to allow me to use mechnical means to assist in the reattachment. What kind of addesvive should I use?
tanks rsjr

rsjr is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 02-22-2013, 01:45 PM   #2
Senior Member
Join Date: Nov 2011
Location: Full time RV'er
Posts: 1,238
Wouldn't attaching it solidly cause the fender or cap to crack due to stress? Wouldn't it be better to use screws somehow with slack so it's snug but not too tight? Maybe using springs held by the screws and a couple flat washers?

Just wondering.

'02 Winnebago Journey DL, DSDP, 36' of fun.

Visit my RV Travel & Repair Blog at : http://chaos.goblinbox.com
Jim_HiTek is offline   Reply With Quote
Old 02-23-2013, 08:52 AM   #3
Junior Member
Join Date: Jan 2010
Posts: 12
It was glued originally, which means it was solidly connected. Thanks it is agood idea. rsjr
rsjr is offline   Reply With Quote
Old 02-23-2013, 09:37 AM   #4
Senior Member
dons2346's Avatar
Country Coach Owners Club
Join Date: Dec 2010
Posts: 3,655
Use 3M 5200 for the "glue" portion.
dons2346 is offline   Reply With Quote
Old 02-24-2013, 09:16 AM   #5
Junior Member
Join Date: Jan 2010
Posts: 12
I will ceck it out
thanks rsjr
rsjr is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:55 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.