Need help fast Ford triton v10 crankshaft pully

[rsmack]

I have a 1998 Fleetwood Storm Wind with a Ford Triton v10 engine. The crankshaft pulley separate from the harmonic balancer and is hitting the fan and is out of alignment. How do I get it back on? If I have to buy a new one what Ford vehicle has this engine.None of the auto parts stores have a motor home option to search for parts. Leaving for a cheeseburger festival on Friday so I need this fixed qiuck

[BFlinn181]

The Ford triton V10 was used in vans and many vehicles. Try calling it an F53 chassis, that's what under your Class A motorhome. Many auto parts stores will loan you a puller kit to remove the pulley, use an air impact wrench to loosen the bolt.

[Waiter21]

I'm trying to picture this... On mine the serpentine belt pulley and the harmonic balancer are one and the same. They don't come apart or separate.

A large bolt in the center of the pulley holds this to the crankshaft.

Can you take a photo and post it?

[twinboat]

Try using NAPA auto parts and input your VIN# of the vehicle.

You may need to check Summit Racing. It seems some early ones are out unavalable.