Community Forums

msmorto · 07-28-2010, 07:31 PM

I have a 2003 Georgie boy pursuit 3205 witch one slide
The slide out is dead.
I have check all the breakers and fuses in the electrical distribution center and under the hood everything check out OK
I have check the motor and it check out OK I have jump the motor and it work. Is there a fuse that I'm missing?
I have no power to the switch or to the motor. I have checked all
fuses, bateries,wiring ect.. everything check OK
Where is the slide out control module panel located ? I have looked everywhere, pull all the removable panel under the storage compartment with no luck. Any help would be apriciated.
Thank's
Mario

rabbott · 07-28-2010, 08:32 PM

most slides will not work unless the vehicles parking brake has been applied! hope this helps.

RJay · 07-28-2010, 09:27 PM

It's possible you tripped the circuit overload protector. I wish I could tell you where to look for it but they are located in different places on different motorhomes.

Martind4 · 07-28-2010, 09:34 PM

Some coaches also have a seat interlock that requires the driver's or passenger's seat to be moved full forward to allow clearance for the slide to operate.

**CLIFFTALL** · 07-29-2010, 06:38 AM

Quote:

Originally Posted by msmorto

I have a 2003 Georgie boy pursuit 3205 witch one slide
The slide out is dead.
I have check all the breakers and fuses in the electrical distribution center and under the hood everything check out OK
I have check the motor and it check out OK I have jump the motor and it work. Is there a fuse that I'm missing?
I have no power to the switch or to the motor. I have checked all
fuses, bateries,wiring ect.. everything check OK
Where is the slide out control module panel located ? I have looked everywhere, pull all the removable panel under the storage compartment with no luck. Any help would be apriciated.
Thank's
Mario

Some systems such as Power Gear Elec have a brake. If that brake is engaged, the slide will not move. there is a way to disengage that brake.
I think it would be helpful to post what system you have, in order for someone to better assist you

.