Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 09-22-2012, 10:35 AM   #1
Junior Member
quinley1958's Avatar
Join Date: Apr 2012
Posts: 28
o9 eagle leaking drain hose

My 09 Eagle has the kitchen on the slide floorplan. When the drain hose extends and contracts with the slide , over time it has gotten kinked. The kitchen drain has been slow for sometime, first noticed in 2011 shortly after we bought it. Has gotten worse. Investigated the problem and found it is kinked at the point it between the middle of the slide and when it would go into the wall(where it lays on top of the grey water tank). It has a track it lays on when it comes through the floor and is guided into the wall. I can't tell if it fails to guide right everytime or if it just did it once and then kinked. At any rate it is kinked and is know leaking. Can I splice this hose with PVC pipe?? Anyone had experience with this problem??


quinley1958 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-22-2012, 10:42 AM   #2
Senior Member
BFlinn181's Avatar

Gulf Streamers Club
Join Date: Jan 2012
Location: Cincinnati
Posts: 12,651

If that section of drain line doesn't have to bend as it moves in and out, perhaps a rigid piece of pvc would work. How are you going to splice it in to the drain line? what ever couplings or clamps you use also will need to slide without causing new issues. How about replacing the whole length of hose?


Bob & Donna
'98 Gulf Stream Sun Voyager DP being pushed by a '00 Beetle TDI
BFlinn181 is offline   Reply With Quote
Old 09-23-2012, 07:05 AM   #3
chastho's Avatar
Join Date: May 2008
Posts: 47
yes it can be repaired with a short 2' radiator hose. a 1 1/4" or 1 1/2" hose, can't remember which, fit mine and I adjusted the length so it would not kink. You can get the hose at a NAPA auto parts store. Pretty easy fix
chastho is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 12:21 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.