Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-11-2011, 03:58 PM   #1
Junior Member
 
Boog42Im's Avatar
 
Join Date: May 2008
Posts: 22
Blog Entries: 1
Power Gear semi automatic levelers

Hi all just wondering if anyone out here has ever changed the reservoir on the levelers. If any of you have done this job ,could you walk me through on how to take it off.I'm thinking it may unscrew some how.I felt all around the top of reservoir and can't find any bolts holding it on.Also would like to know if any of you ever had a small pin hole like leak at bottom of reservoir.This small hole is enough to loose fluid under pressure and when jacks aren't down.Can this small hole be fixed or is it to the point that reservoir has to be replaced.I'm hoping it can be fixed some how ,because the cost of a replacement reservoir is very costly.
__________________

__________________
Boog42Im is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-12-2011, 03:41 PM   #2
Senior Member
 
Monaco Owners Club
Join Date: Nov 2009
Posts: 164
Yes to all the above. 4 small bolts hold the tank to the pump, Weld the leak. The tank is NOT under pressure. Search Power Gear on this site and all will be revealed.
__________________

__________________
Buford B.
Aero AT4040XL, AFE, Koni FSD,
Source Eng. Trailing Arms
Buford B is offline   Reply With Quote
Old 04-12-2011, 09:27 PM   #3
Registered User


 
Monaco Owners Club
Join Date: May 2009
Posts: 3,198
yes also, Buford is spot on.
__________________
JimM68 is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Gear Tank Support nodine Monaco Owner's Forum 40 09-10-2013 06:15 PM
Trouble-Older Fleetwood with Power Gear Jacks BOOKWORM Fleetwood Products Owner's Forum 3 04-13-2011 04:10 PM
Power Gear jack yoyoman1 National RV Owner's Forum 3 05-17-2010 08:39 PM
Power Gear jack yoyoman1 National RV Owner's Forum 3 05-17-2010 02:52 PM
Neutral Safety Switch in Power Gear leveler RedWolf2426 Monaco Owner's Forum 4 09-22-2009 06:47 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 10:28 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.