Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 05-06-2015, 03:39 PM   #1
Junior Member
ImanRVCowboy's Avatar
Join Date: Aug 2012
Posts: 12
re-attaching fender

I'm hoping someone has figured out a simple solution for this.
The rear left fender on my motor home is loose due to it wearing away the fiberglass. Where once was a hole, there now is a slot. That fender is too large to remove has gives little range of motion. Any ideas??



ImanRVCowboy is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-06-2015, 03:43 PM   #2
Senior Member
palehorse89's Avatar

Newmar Owners Club
Join Date: Oct 2009
Posts: 6,692
Hello Bill, You are going to have to do /make a repair on it, where the slot is using a fiberglass repair kit or maybe some 2 part epoxy, then sand/file it down(This sand/file work depends on your applacation) then re-drill the hole.

2000 Newmar MADP 4060, 350ISC, Spartan MM, IFS 2011 Jeep JK, M&G Braking, 2014 MTI 27' Hog Hauler, Wireless brake control, 2006Ultra & 1989 Springer
palehorse89 is online now   Reply With Quote
Old 05-06-2015, 08:02 PM   #3
Senior Member
1ciderdog's Avatar

Join Date: Jun 2010
Posts: 4,238
I used JB Weld and then clamps to hold it in place until the epoxy set up. A thousand miles or so and still holding.
Bob, Sandi & Marmaduke the Big Pug
SW OREGON 2004 Journey 39K, 330 Cat
If towing: a 2006 Mini Cooper or 1995 Wrangler
1ciderdog is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fender Replacement ywgbandit Travel Trailer Discussion 1 05-03-2015 06:24 PM
2006 Travel Supreme ME Fender Skirt Gandalf41 Travel Supreme Owner's Forum 7 10-09-2014 06:05 AM
Remove Fender ??? TireSpin Class A Motorhome Discussions 1 06-14-2014 04:18 AM
RV replacement fender source ksmith Travel Trailer Discussion 1 05-06-2014 05:34 AM
Anyone know where to find a 2000 Brave front fender passenger side? Goebs Winnebago Industries Owner's Forum 12 04-23-2014 09:32 AM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:23 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.