Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 06-02-2015, 05:06 PM   #1
Junior Member
Join Date: Jun 2015
Posts: 1
Talking Realign Newmar 3124 main slideout

On our maiden voyage, I attempted to open the main slide with the over center lock engaged. Discovered the problem and opened the slide with no problems. However, on retraction, the aft end of the slide is 1" from the side of the rig. Can I realign this myself or do I need to get professional help? Nothing appears to be bent, but when I count the holes on the underside of the rails, there is one more on the back tube than the front three. Pretty sure I "slipped a cog", but not sure how to get that tube to back up one notch. Any help appreciated.

ndheer is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-02-2015, 06:24 PM   #2
Senior Member
denlock's Avatar
Newmar Owners Club
Spartan Chassis
Join Date: Feb 2005
Location: Sterling Heights, MI
Posts: 2,724
I'm going to watch this, I did the same thing the other day.

Tricia & Dennis Lockhart
2010 Ventana 4333
Spartan MM w/Cummins 360 ISC
denlock is offline   Reply With Quote
Old 06-02-2015, 07:08 PM   #3
Senior Member
RussM311's Avatar
LA Gulf Coast Campers
Join Date: May 2013
Location: Bossier City, LA
Posts: 165
If you will go over to the Newmar forum here in IRV2 and you will get complete instructions on how to adjust the slide. Not a real hard endeavor, but you do need to understand what you are doing. Look for a guy named 007..... he is the Newmar expert.
John (Rusty) & Jessica + Sarge $ Rufus
2013 Newmar Canyon Star 3953
2014 Honda CRV
RussM311 is offline   Reply With Quote

newmar, slide, slideout

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Suggestions on slideout problem Rossi6998 Winnebago Industries Owner's Forum 23 05-17-2015 09:53 PM
Schwintek Slideout - Question Rossi6998 Winnebago Industries Owner's Forum 2 02-26-2015 09:06 PM
Main Circuit Breaker fail.. Hooligan MH-General Discussions & Problems 7 09-09-2014 07:24 PM
Support for Wiring Harness - Chassis To Slideout Doc Hugh Class A Motorhome Discussions 5 08-20-2014 10:54 PM

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 07:27 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.