I have a 2000 Sun Voyager 8357 and it has a rear slide out that when I slide the bedroom in, the top seals, but the bottom sticks out, like 3 inches and I'm afraid it will leak when the rainy season comes (even in California). Does anyone know if this is adjustable at the bottom to make it fit flush. The passenger side slide with the living room slides out no problem and slides in no problem and fits flush with the side wall of the coach. The left rear bedroom side slides out fine, but doesn't go all the way flush on the bottom when slid in. Any help is appreciated.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Kenranch, you may be looking at two problems.
1) There may be an adjustment concerning the top sealing with bottom still out three inches. top should seal 1st but not that soon.
2) Slide motor may be tripping too soon. I would investigate the top issue first (which may also solve the bottom issue) then address the limits on slide motor. Slide adjustment can get tricky so be careful when you make a change. If uncomfortable then consult a repair shop who most likely can solve the issues quickly.
Welcome to IRV2! We're sure glad you joined the gang! 
Linear Mode
