Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 06-16-2016, 12:16 PM   #1
Member
 
Voyageurs's Avatar
 
Join Date: Apr 2013
Posts: 30
Replacing slide out seal need help

I removed the old seal and like to know a good easy way to replace the new outer Slide Out Seal Double Bulb Seal

any hint would be appreciated...
any body knows of a UTube video how to replace a Slide Out Seal Double Bulb Seal ....
is there a special tool required to install on the slot.?
thanks

Luc
Attached Thumbnails
Click image for larger version

Name:	New Seal.JPG
Views:	67
Size:	175.8 KB
ID:	130383   Click image for larger version

Name:	DSCN2059.JPG
Views:	69
Size:	162.4 KB
ID:	130384  

Click image for larger version

Name:	DSCN2044.JPG
Views:	70
Size:	170.7 KB
ID:	130385   Click image for larger version

Name:	DSCN2060.JPG
Views:	63
Size:	176.8 KB
ID:	130386  

__________________

__________________
Voyageurs is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-16-2016, 10:09 PM   #2
Member
 
Ford Super Duty Owner
Rexhall Owners Group
Join Date: Oct 2013
Location: Tucson, AZ
Posts: 77
Quote:
Originally Posted by Voyageurs View Post
I removed the old seal and like to know a good easy way to replace the new outer Slide Out Seal Double Bulb Seal

any hint would be appreciated...
any body knows of a UTube video how to replace a Slide Out Seal Double Bulb Seal ....
is there a special tool required to install on the slot.?
thanks

Luc
I don't know of a video, but I replaced the seal on my 13 ft slide last year. It wasn't too difficult.
Be sure to scrape and clean the mounting surface. On mine, the seal clamped onto a 1/2" standing seam. I pulled the slide out about 12 inches. Starting at the top of the slide opening, I was able to push the bulb seal onto the standing seam all the way across the top of the opening. I cut the seal. Overlapping the corner, I then pushed the bulb seal onto the standing seam vertically along the right side opening, then went to left and did the same thing.
Total time to reseal the slide was approx. 3 hours. Voila!!! No leaks to this day even though we have had some tremendous rains with winds.
If you have not purchased your bulb seal, I bought mine from Uni-Grip Inc.
I'll be happy to answer any additional questions.
a.j.
__________________

__________________
96 Rexhall RollsAire, 36 ft. w/slide
Ford F53, 460 CI, Banks
150 Watts Solar w/4-12V batteries
ajpaero is offline   Reply With Quote
Old 06-17-2016, 11:18 AM   #3
Member
 
Voyageurs's Avatar
 
Join Date: Apr 2013
Posts: 30
Replacing Slide out Seal

Finally manage to install the seal around the slide out...
Needed more room to get the seal in at the bottom ...used my jack to raise the slide out ...worked perfectly...

thank to all for the comments and help

Luc
Attached Thumbnails
Click image for larger version

Name:	Used jack to install bottom seal (2).JPG
Views:	52
Size:	180.1 KB
ID:	130456   Click image for larger version

Name:	Used jack to install bottom seal.JPG
Views:	53
Size:	184.6 KB
ID:	130457  

Click image for larger version

Name:	Used jack to install bottom seal (3).JPG
Views:	53
Size:	178.8 KB
ID:	130458  
__________________
Voyageurs is offline   Reply With Quote
Reply

Tags
need help, seal, slide, slide out



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Seal Part Number for Front Bearing Seal megehrs Freightliner Motorhome Chassis Forum 3 05-13-2016 01:10 PM
Slide Out Seal Coming Out tkamsal Winnebago Industries Owner's Forum 13 03-26-2014 08:57 AM
Need to replace slide out seal Algoma Alpine Coach Owner's Forum 1 03-12-2012 12:31 AM
Slide Seal Glue and Seal "flipper" LewF Monaco Owner's Forum 6 01-06-2012 09:48 AM
replacing slide out gasket/seal Jyll MH-General Discussions & Problems 8 09-16-2011 07:11 AM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 05:52 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.