|
|
10-12-2019, 11:31 AM
|
#1
|
Senior Member
Join Date: Oct 2019
Posts: 137
|
Rollover Safety - Steel Reinforced Driver Cage?
After looking at the video on the rv.org website of the Fleetwood Class A involved in a cop chase, which had extensive front end and side damage from sideswiping a palm tree at a very low speed, as well as photos of a nearly completely flattened RVs, I have tried to determine which Class As would better stand up to such damage.
https://rv.org/blogs/news/motorhome-...gh-speed-chase
https://rv.org/blogs/news/short-whee...o-hand-in-hand
The only way it seems that I can even try to discern this is by reading sales brochures. For example, the Safari Trek line has the following blurb for 2005+ coaches: "Steel Cage Cockpit Construction". It is missing from brochures previous to this year.
This very same blurb can be found in many Monaco / Holiday Rambler brochures but not all of them. This is particularly true of the lower cost product lines, so I don't think it is an accidental omission.
Tiffen Class As have the following line in some of their brochures, and perhaps all of them: "Steel / Aluminum Reinforced Structure". Does anybody know if Tiffen coaches do indeed have a similar "steel cage cockpit construction" to protect the driver and passenger seats in the front?
How much does this safety feature really help? If the coach does roll over would this protect the two individuals? Or would the weight of the coach and the forces from many rollovers cause it to likely fail?
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-12-2019, 12:03 PM
|
#2
|
Senior Member
Join Date: Jun 2019
Posts: 129
|
Your question is a valid one and worth a bit of research. The steel cage, seat and seatbelt mounting are just some of the reasons I have bought Winnebago twice.
Thankfully deaths in RV accidents are very rare. We go slow and are heavy. High speed rollover in a 20,000lb vehicle is a bad thing regardless of manufacture. Your chances of walking away unharmed are not good.
Buy the best engineering you can afford. Which also includes wiring and balanced weight distribution. Also pay very careful attention to tire age, inflation and condition.
We are essentially truck drivers and should act and drive like the best them. A walk around and tire check before EVERY drive are essential to protect life and property. It only takes a couple of minutes to thump all the tires look for leaks etc.
There are many aftermarket suspension improvements that can be made to help with stability and handling. Mostly in gassers but some DP’s as well.
Then drive with common sense and fully engaged, relax and enjoy the ride.
__________________
2019 Itasca Sunstar 31BE
Sway bars, Rear track bar, 340w Solar with Blue Sky controller.
|
|
|
10-12-2019, 02:15 PM
|
#3
|
Registered User
Monaco Owners Club
Join Date: Mar 2018
Location: Blairsville, GA & WPB, FL
Posts: 3,993
|
Unless it’s a steel bus...Prevost and Bluebird, it’s hard to tell for sure. You need more than just the driver’s cage to be steel in a rollover. Newell, Foretravel, Country Coach, and the bigger Monaco’s have steel framing...semi monocoque so better chanced of it holding up. The Camelot has aluminum framing so not as strong.
I’d be more concerned ab out a head on than a rollover. Between being higher up and a generator up front should help. The structure beside the generator on a Monaco should help too as it’s higher and stronger than most to support the 2 trailing arms on each side that hold the H frame for the front axle.
As you can see in your first link, many gas MHs are a truck chassis with a top structure that’s more like a travel trailer (wood framing) that’s laid on top of the frame...no real protection.
|
|
|
10-12-2019, 02:31 PM
|
#4
|
Senior Member
Join Date: Mar 2019
Posts: 5,625
|
When we took the factory tour the rep said the Forest River Georgetown also has a steel cage for the front. Since the over-the-driver euroloft, the bed that moves up and down on straps, says it can support up to 700 lbs I tend to believe him.
Ray
__________________
2020 Forest River Georgetown GT5 34H5
2020 Equinox Premier AWD 2.0L/9-speed
|
|
|
10-12-2019, 05:17 PM
|
#5
|
Senior Member
Join Date: Sep 2018
Location: Fort Myers, FL
Posts: 1,660
|
I think I'd use a different and more maneuverable getaway vehicle so I could miss the palm trees easily.
I believe all the manufacturers that cite using "steel and aluminum" framing are only trying to look better than wood construction. None of them are bragging about in being a built in roll cage... they simply want to keep the roof up, off the floor...
__________________
2008 Phaeton 36QSH, Safe-t-Plus, Quadra Bigfoot
2017 Jeep Cherokee Trailhawk w/ flat tow wiring mod.
Blue ox, BrakeMaster + BrakeAway, diode lights and charge.
|
|
|
10-12-2019, 06:28 PM
|
#6
|
Senior Member
Join Date: Oct 2019
Posts: 137
|
I just checked the Newmar brochures for three different Class As, including their top-of-the line DP, and they only mention aluminum...
I realize this is no substitute for a race car roll cage. BTDT. But I do think it would be nice to have steel beams over my head rather than aluminum. People have also been killed when the shelves or the TV have become detached from a collision.
I sure wish there was a website devoted to photos of RV accidents by vendor so we could at least study how well they held up in various situations. But I imagine that the vast majority of RV vendors wouldn't like that one bit.That you would get serious pressure from the RVIA to cease and desist any such attempt.
And Nickd, the RV.org website used the analogy of driving like you are on a motorcycle instead of a truck.
|
|
|
10-12-2019, 07:01 PM
|
#7
|
Senior Member
Join Date: Apr 2015
Location: Rogers, AR
Posts: 2,590
|
I think you need to stand in front of a motorhome and study the structure. Most all of them have steel/aluminum framing which likely would keep it’s shape in a rollover on flat ground. If the cockpit area was up on an earth bank in a rollover, I’m sure it would be mostly crushed. My coach has a fairly large driver window, not much structural support there. I also have a huge front window, as all do, not much structural support there, just glass. The support around the front door area would be better than on the driver side.
The best thing it has going for it (you) is the height where you set and it’s weight.
It makes me think of a U-tube video of a flat front truck that was hit just behind the cab and the driver was (probably no seat belt) ejected out through the windshield.
We came through Oklahoma City last year just shortly after a semi rear ended a pusher and it pretty much cleaned off the rear floor of any structure before it went off to the side. They are not designed to be crash tested.
Drive carefully and responsibly.
__________________
2019 Fleetwood Discovery LXE 40M w/2021 Equinox
|
|
|
10-12-2019, 07:08 PM
|
#8
|
Senior Member
Damon Owners Club Freightliner Owners Club
Join Date: Feb 2019
Location: Minnesnowta
Posts: 373
|
A promotional video for our 2008 Damon Astoria mentions "steel cage construction" around the cockpit. Not sure it would actually hold up in a high speed roll over though. As the driver, I would just try hard to not let that happen.
I'm actually more concerned about front end collisions. I looked and was shocked to see our coach had no real front bumper. Just fiberglass and a thin steel plate (firewall) between my legs and whatever I hit! I mean I realize crash testing RVs isn't realistic but shouldn't the NTSB (or whatever agency) at least require legitimate front bumpers on these class A coaches?
__________________
Jeff & Kelly
2008 Damon Astoria 3776 PE
|
|
|
10-12-2019, 07:10 PM
|
#9
|
Senior Member
Join Date: Apr 2019
Location: Arisona
Posts: 700
|
You won't find one that will survive a rollover. Unless they have a titanium superstructure...It just defies physics weight vs extruded steel and or aluminum framing. So slow down and keep it upright!
__________________
2023 GD Imagine XLS 23LDE 2022 Ford F-150
|
|
|
10-12-2019, 07:23 PM
|
#10
|
Senior Member
Join Date: Apr 2019
Location: Arisona
Posts: 700
|
I would venture to guess that class A/C, B and C would do better in a rollover than any class A MH.
__________________
2023 GD Imagine XLS 23LDE 2022 Ford F-150
|
|
|
10-12-2019, 07:25 PM
|
#11
|
Senior Member
Vintage RV Owners Club Fleetwood Owners Club
Join Date: Dec 2009
Location: CA
Posts: 1,265
|
Quote:
Originally Posted by Reacher
You won't find one that will survive a rollover. Unless they have a titanium superstructure...It just defies physics weight vs extruded steel and or aluminum framing. So slow down and keep it upright!
|
Yep, a little too much weight once it flips.
__________________
1988 PACE ARROW
P30, 454 ENG, TURBO 400 TRANS
TOWING '80 WING OR 2006 AVALON
|
|
|
10-12-2019, 07:54 PM
|
#12
|
Community Administrator
Tiffin Owners Club
Join Date: Sep 2013
Location: DFW, Texas
Posts: 21,151
|
Quote:
Originally Posted by Paul Foster
I just checked the Newmar brochures for three different Class As, including their top-of-the line DP, and they only mention aluminum...
|
You are correct. We took a tour of the Newell plant not too long ago and their wall framing is aluminum but they do have sheet aluminum skins and heavier than normal interior plywood paneling. A very well constructed coach.
__________________
2017 Phaeton 40IH XSH Maroon Coral - Power Glide Chassis with IFS
Previous '15 Tiffin Allegro RED 38QRA and '06 Itasca Sunrise 35A
'16 Jeep JKU Wrangler Sahara or '08 Honda Goldwing
|
|
|
10-12-2019, 08:17 PM
|
#13
|
Senior Member
Join Date: Sep 2018
Location: Fort Myers, FL
Posts: 1,660
|
How about air bags?
__________________
2008 Phaeton 36QSH, Safe-t-Plus, Quadra Bigfoot
2017 Jeep Cherokee Trailhawk w/ flat tow wiring mod.
Blue ox, BrakeMaster + BrakeAway, diode lights and charge.
|
|
|
10-12-2019, 08:27 PM
|
#14
|
Senior Member
Country Coach Owners Club Solo Rvers Club iRV2 No Limits Club
Join Date: May 2011
Location: Vancouver, WA
Posts: 37,725
|
Check out a Country Coach with their in factory built semi-monocoque DynoMax chassis. Fully welded steel including the superstructure. Thought I had a couple pictures of one that looks like a rollover but they must be on my home computer.
__________________
2009 45' Magna 630 w/Cummins ISX 650 HP/1950 Lbs Ft, HWH Active Air
Charter Good Sam Lifetime Member, FMCA,
RV'ing since 1957, NRA Benefactor Life, towing '21 Jeep JLU Rubicon Ecodiesel
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|