|
|
10-09-2014, 01:23 PM
|
#1
|
Senior Member
Fleetwood Owners Club
Join Date: Jun 2014
Location: Lakeway,tx
Posts: 249
|
Scan Gauge D - No Transmission Info
I have a 2010 discovery ISB Allison 3000. The coach has a digital readout at dash for trip, temp, trans temp etc. I also has a code field and when checked says 3 trans codes. I bought a scan guage d and don't get any transmission data at all. No trans temp, No trans codes? I have searched the forum to see if it is working correctly or if I need to do something to read trans temp and retrieve codes? Thanks for the help. Yall have never let me down!! JD
__________________
Jeff & Steph
2010 Discovery 40x Spartan Cummins ISB
2015 Wrangler Sahara Unlimited
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-09-2014, 05:25 PM
|
#2
|
Senior Member
National RV Owners Club
Join Date: Jun 2010
Posts: 4,581
|
I don't know aboout the codes but on mine the transmission temp under in or as TFT.
__________________
Bob & Sandi, dogs Tasha a Frenchie and Tiki a Skipperkey
SW OREGON 2005 34 foot DolphinLX
If towing: a bright red 2016 Mini Cooper on a tow dolly.
|
|
|
10-10-2014, 05:19 PM
|
#3
|
Senior Member
Join Date: Mar 2007
Location: Apex, NC
Posts: 1,857
|
I don't know about the Diesel version but I had a gas version. I had to program the TFT function into it. Check your manual.
__________________
2010 Winnebago Journey Express 34Y
2010 Freightliner XCS (mfd 9/'09)
'07 Saturn Vue V6
|
|
|
10-10-2014, 07:00 PM
|
#4
|
Senior Member
Newmar Owners Club
Join Date: Jul 2006
Location: Wellington, Florida
Posts: 13,599
|
Hi Hogbus,
The User manual can be found at
ScanGaugeD - Advanced J1939 & J1708 compatible Vehicle Monitor for Diesel Pusher Vehicles : Linear Logic
On page 19 of my user manual (ScanGuage D) are instructions for DTC codes.
__________________
Gary
2005 Newmar KSDP 3910 + GMC ENVOY XUV 37K lbs Moving Down The Road
The Avatar Is Many Times Around The USA
Nobody Knows Your Coach Like Somebody Who Owns One Just Like Yours
|
|
|
10-13-2014, 08:49 AM
|
#5
|
Senior Member
Winnebago Owners Club
Join Date: Feb 2014
Location: Mansfield, La. 71052
Posts: 103
|
Not all units will report transmission temp to scangauge. TFT will be there, but no display of temp.
|
|
|
10-13-2014, 09:36 AM
|
#6
|
Senior Member
Fleetwood Owners Club
Join Date: Jun 2014
Location: Lakeway,tx
Posts: 249
|
johnzuki
I guess mine is one that doesn't do transmission info. Do you know if there is a fix for that. Thanks , JD
__________________
Jeff & Steph
2010 Discovery 40x Spartan Cummins ISB
2015 Wrangler Sahara Unlimited
|
|
|
10-13-2014, 09:13 PM
|
#7
|
Senior Member
Join Date: Oct 2002
Location: Madison, MS
Posts: 10,527
|
It is a FACT that the SG II (for gassers) cannot read the TFT for the 6 speed Allisons used a on many Workhorse chassis. LL could only "crack the code" for the language used by the 5 speed 1000 and 2000 series Allisons.
I'm GUESSING that all the 3000MH and 4000MH Allisons are six speed trannys, so it is likely the SG-D can't display the TFT for them either.
|
|
|
10-14-2014, 06:14 AM
|
#8
|
Senior Member
Newmar Owners Club
Join Date: Jul 2006
Location: Wellington, Florida
Posts: 13,599
|
Hi edgray,
My ScanGaugeD does read TFT from my 3000MH Allison transmission.
__________________
Gary
2005 Newmar KSDP 3910 + GMC ENVOY XUV 37K lbs Moving Down The Road
The Avatar Is Many Times Around The USA
Nobody Knows Your Coach Like Somebody Who Owns One Just Like Yours
|
|
|
10-14-2014, 07:20 AM
|
#9
|
Senior Member
Winnebago Owners Club
Join Date: Feb 2008
Posts: 728
|
My Scan Gauge does not read the trans temp from my Allison 2002, MH2000 5 speed. Tried many times with Scan Gauge engineers but no luck. If anyone with a MH2000 gets the transmission temp please let me know.
|
|
|
10-14-2014, 07:28 AM
|
#10
|
Senior Member
Join Date: Oct 2002
Location: Madison, MS
Posts: 10,527
|
Quote:
Originally Posted by GaryKD
Hi edgray,
My ScanGaugeD does read TFT from my 3000MH Allison transmission.
|
Well that is great. Perhaps you can help the OP figure out why his won't. Maybe it is just a programming error???
|
|
|
10-14-2014, 07:31 AM
|
#11
|
Senior Member
Join Date: Oct 2002
Location: Madison, MS
Posts: 10,527
|
Quote:
Originally Posted by charles tuit
My Scan Gauge does not read the trans temp from my Allison 2002, MH2000 5 speed. Tried many times with Scan Gauge engineers but no luck. If anyone with a MH2000 gets the transmission temp please let me know.
|
Must be because yours is a diesel, because there are 2000 series 5 speed GASSERS that do get TFT on their SG II device.
Is yours a SG-D or a SG II ???
|
|
|
10-14-2014, 07:59 AM
|
#12
|
Senior Member
Winnebago Owners Club
Join Date: Feb 2008
Posts: 728
|
Quote:
Originally Posted by Hogbus
I have a 2010 discovery ISB Allison 3000. The coach has a digital readout at dash for trip, temp, trans temp etc. I also has a code field and when checked says 3 trans codes. I bought a scan guage d and don't get any transmission data at all. No trans temp, No trans codes? I have searched the forum to see if it is working correctly or if I need to do something to read trans temp and retrieve codes? Thanks for the help. Yall have never let me down!! JD
|
I would call Scan Gauge. Even tho they couldn't help me the engineering staff is very helpful. I'll back out of this post as I don't want to hijack the OP's question.
|
|
|
10-14-2014, 08:08 AM
|
#13
|
Senior Member
Fleetwood Owners Club
Join Date: Jun 2009
Posts: 4,031
|
Quote:
Originally Posted by Hogbus
johnzuki
I guess mine is one that doesn't do transmission info. Do you know if there is a fix for that. Thanks , JD
|
A VMSpc will get readings for the transmission. Will even tell you what gear it is in. Plus trans temp.
And all kinds of engine info
__________________
99 Discovery 34Q ISB
2014 MKS AWD EcoBoost Toad
Fulltime Since "99"
|
|
|
10-15-2014, 11:37 PM
|
#14
|
Senior Member
Newmar Owners Club Spartan Chassis
Join Date: Jun 2013
Location: Apple Valley CA
Posts: 1,069
|
Quote:
Originally Posted by Hogbus
I have a 2010 discovery ISB Allison 3000. The coach has a digital readout at dash for trip, temp, trans temp etc. I also has a code field and when checked says 3 trans codes. I bought a scan guage d and don't get any transmission data at all. No trans temp, No trans codes? I have searched the forum to see if it is working correctly or if I need to do something to read trans temp and retrieve codes? Thanks for the help. Yall have never let me down!! JD
|
My MH3000 will report TFT and what gear I'm in. I had to program in the gear code but it has always gave me the Trans temp right out of the box. Talk to the engineers at Scan gauge they can walk you through it. The programming is simple.
__________________
[SIGPIC][/SIGPIC]
Craig & Carolyn Roberts Apple Valley, CA
Toad: 2017 GMC Canyon 4X4 Crewcab
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|