ScanGuage D?

[mel s]

Originally Posted by znt1186

Got one from my son for Christmas. Easy to connect and gives a lot of useful information that is more accurate than the dash gauges. It can give you a lot of different readings, but be aware that you will have to reset the readouts you want every time you turn of the ignition.

znt1186
I've had a ScanGauge D for over 3 years, (15,000+ miles), and I've NEVER had to "reset the readouts".
Call Linear Logic, (1-888-433-5664) and ask them how to fix yours.
Mel
'96 Safari, 250 hp 3126 Cat, Allison M3060.

[DD788Snipe]

Nice job Joe.

[jimfh2o]

Nice install...how did you wire it up?

[MSHappyCampers]

Originally Posted by jimfh2o

Nice install...how did you wire it up?

It comes with a cable that has the big plug on one end that connects to the computer diagnostic port under the dash. The other end has a phone-type connector that plugs into either the end or rear of the ScanGuage. I drilled a hole in the dash panel directly behind where the rear connection is, brought the cable through the dash and used the velcro that came with the unit to stick it to the dash. I rolled up the excess cable behind the dash. Makes a really clean installation!

[jimfh2o]

Does the OBD cable provide power or is there another wire/cable for power? Thanks Joe!

[MSHappyCampers]

Originally Posted by jimfh2o

Does the OBD cable provide power or is there another wire/cable for power? Thanks Joe!

No separate power required!